Gibbon Packing

An employee was removing meat from a bone and punctured their wrist with the knife.

An employee was tailing logs with a chainsaw. As they set the chainsaw on a log, the chain contacted the employee's left index finger, fracturing it. The fingertip was surgically amputated.

An employee was using a Johnson bar to pry a piece of concrete with the help of a skid steer. When the bar moved, the employee was struck in the mouth by it, resulting in a tooth avulsion and a mouth injury that required stitches.

An employee was helping another employee pick up a round piece of metal to recoup a skid. The metal slipped and lacerated the employee's right middle finger, resulting in a fingertip amputation.

An employee was attaching a wrench to a drill rig rod. The wrench turned and struck the employee's right hand, resulting in a laceration and fracture to their index finger.

An employee was climbing a ladder while carrying 12-foot metal trims to the roof. As the top end of the metal rose above the parapet wall of the roof, a strong gust of wind spun the metal backward, causing the employee to lose his grip on the metal. The trims lacerated his left wrist, which required hospitalization and surgery.

An employee was scraping dried glue from the top lid of a hot glue pot. His left hand slipped and came into contact with the hot glue. He then suffered burns to his hands and fingers as he tried to remove the glue. He was hospitalized.

An employee was in a scissor lift approximately 20 feet above the ground to place a plastic tarp on a catwalk in order to catch condensation. They positioned the lift opposite the work area and stepped out of the scissor lift onto an I-beam. The employee fell from the I-beam to the ground. The employee was hospitalized with a skull fracture on the right side of their head and injuries to the chest and both eyes.

A maintenance employee was called to look at a pallet conveyor machine where a chain had fallen off a sprocket wheel. When the employee grabbed the loose chain, a light sensor caused the machine to restart. This created a pinch point between the chain and sprocket that caught the employee's left little finger. The finger was surgically amputated at the second knuckle.

The injured employee was standing by one of the stationary computers along the wall. There was a half-pallet located approximately 3 feet behind the employee that consisted of 12-pound boxes stacked six boxes high. A forklift was transporting a pallet that came in contact with the stationary pallet behind the injured employee, causing four boxes to fall and contact their legs. The injured employee was hospitalized with leg injuries.

An employee was using a box strapping machine to place straps on boxes when his right middle finger was caught in the machine, resulting in an open fracture to the distal phalanx.

An employee was stacking concrete blocks for a concrete bunker. As a block was swinging into place, the employee's left leg was pinched between two blocks, resulting in injuries to his left heel and lower leg.

An employee was climbing a ladder to inspect a vent in a restaurant dining area. The ladder slid out on the floor and the employee fell approximately 12 feet onto the ladder and the floor. He was hospitalized with a dislocated shoulder and a back injury.

An employee was rappelling down a tree. When he was most of the way down, he fell on the ground and suffered a broken pelvis.

An employee was filtering a fryer with a fryer filter machine. After going around the corner and then returning to the fryers, the employee stepped into the filter machine. The hot oil burned the employee's right ankle, and the employee was hospitalized.

An employee was cleaning out corn from a grain bin. The sweep auger in the bin was activated and caught his trouser leg. His leg was pulled into the auger, which injured his calf and caused leg fractures and lacerations.