Inhalation of harmful substance-single episode · Poisoning, toxic, noxious, or allergenic effect, unspecified
At a glance
Federal OSHA recorded a severe workplace injury
at Covestro LLC, 8500 West Bay Rd, BAYTOWN, TEXAS 77523
on — Poisoning, toxic, noxious, or allergenic effect, unspecified, affecting the bODY SYSTEMS.
Final narrative
An employee was working at the chlorine loading station and was changing out a transfer hose from a railcar. Upon disconnecting the hose, the employee inhaled chlorine, requiring hospitalization.
An employee was clearing hot plastic waste product from a cooling bath with a hook and placing it onto the floor to be shoveled away for disposal. The employee lost his footing and fell into the hot plastic and water on the floor, resulting in second-degree burns on his right torso and leg, with suspected third-degree burns on parts of his leg.
An employee was clearing out a line when 4-tert-butylphenol (TBP) spilled onto the employee. He sustained chemical burns the head, face, eyes, and also suffered respiratory distress.
An employee was passing through a building when she suffered an allergic reaction to a cinnamon air freshener. The employee began to feel dizzy and ill, ultimately becoming unresponsive. The employee was hospitalized.
An employee wearing a blasting hood was preparing to blast inside a tank. The line that supplies the hood with breathing air was plugged into an argon line. The employee breathed the argon gas and fell. The employee was hospitalized for argon poisoning.
An employee was preparing a pump for maintenance. When the employee removed a cover, chemicals were released into the air. The employee was exposed to hydrogen sulfide and methyl mercaptan and was hospitalized.
An employee was cutting steel channels from a hanging rack that was being supported by a forklift. When they were finished, the forklift started moving the rack out of the area and a piece of material snagged one of the rack legs, causing the rack to tilt backward. The rack slipped off the forklift and struck the employee on his right side/lower back. He sustained a fractured pelvis and was hospitalized.
An employee was working to remove waste wire between two boat rack/spreader bars (10 feet in length, 8 inches wide, and 16 inches tall, with a center lifting point for a crane hook) in the hanging department. One boat rack was leaning on another boat rack. The employee reached between the boat racks to move the leaning boat rack and remove the waste wire. The leaning boat rack shifted and the employee's left index finger was pinched between the two racks (weighing approximately 600 pounds each). The employee sustained an abrasive amputation of the left index fingertip from the nailbed up.
An employee was performing maintenance on a coating machine and the belt cover guard was removed to repair the belt. The moving belt caught the employee's fingers and pulled them between the belts, injuring three fingers on the employee's left hand. The fingernails were removed from their little and middle fingers. The ring finger was amputated at the first knuckle.
An employee was stacking steel grating. The grating moved and their right ring finger got caught between grating. The last digit of the ring finger was amputated.
After cutting a slab of beef short ribs, an employee turned to grab the pieces he had cut and his right hand contacted the saw blade. The employee sustained an amputation to his right index finger.
An employee was unloading a carpet pad from a truck when they fell from the truck dock to the concrete below, resulting in five fractured ribs and an injury to their left lung.
An employee was walking up a walkway to enter a building through the back entrance when she tripped over the lip of the cement ramp. The employee fell and sustained a fractured right hip.