Federal OSHA recorded a severe workplace injury
at Great Dane Trailers, 1200 N Centennial Road , WAYNE, NEBRASKA 68787
on — Strains, affecting the back, including spine, spinal cord, unspecified.
Final narrative
An employee was using a 4x4 to lift a container of paint and suffered a strained back.
HospitalizedBack, including spine, spinal cord, unspecifiedContainers, unspecified
An employee was hoisting an axle in the buggy department when one side of the sling came loose, causing the axle to tip. The sling hook raised up from the weight transfer, causing the employee's left little finger to be caught by the rigidness of the hook. The fingertip was amputated.
An employee removed a semi-refrigeration unit from the semi-trailer to repair it. After repair, the employee was putting it back on the semi-trailer, but the bolts did not line up. As the employee tried to adjust the bolts, his left index finger was caught between the refrigeration unit and the semi-trailer resulting in amputation of his nail and a quarter inch of his finger.
While an employee was making an adjustment on the rivet squeezers, the machine actuated and caused an amputation of the right thumb proximal to the nail bed.
An employee was building the frame of a trailer. The trailer frame was lowered via hydraulics while the employee's finger was in a pinch point. The distal portion of his left fifth digit was amputated.
An employee was loading a flat bed semi-trailer with a part that was almost as long as the trailer. As he was walking the part up the deck of the trailer, his right foot broke through the rotten wooden bed of the trailer and his right shin struck a metal cross beam, suffering a laceration that required hospitalization.
On 12/22/2023, an employee was carrying bins filled with pasta to a refrigerator. As he lifted a 20-pound bin, he felt pain in his lower back. The employee sustained a herniated disc.
An employee was lifting a patient when they pulled a back muscle. She suffered back pain and spasms radiating into her leg with weakness and numbness. The employee's L3-L4 disc was herniated and she was hospitalized.
An employee was lifting a bundle of insulation with a colleague when he felt severe pain in the right side of his lower back/hip region. The employee sustained a severe muscle injury.
More severe injuries in this industry (NAICS 336212)
An employee was changing a die in a press when the die slipped and crushed the employee's left index finger. The employee sustained an open facture of the tuft of the left distal phalanx and a partial amputation.
An employee was assisting with rigging a magnet to an overhead crane in order to lift a sheet of steel. The employee's right thumb was between the crane's hook and the chain passing through the hook, and when the crane was raised, the distal end of their thumb was crushed. Part of the employee's right thumb was medically amputated.
Two employees were working together to insert a pin into a hydraulic cylinder. One employee was holding the cylinder in place to align it with the pinhole, while the injured employee was inserting the pin. The injured employee was aligning the pin and moved to determine whether the hole alignment was too high or low. At that moment, the crowbar being used to assist with alignment slipped and his left index fingertip was pinched between the cylinder and the housing, resulting in an amputation just below the fingernail.
An employee was hoisting an axle in the buggy department when one side of the sling came loose, causing the axle to tip. The sling hook raised up from the weight transfer, causing the employee's left little finger to be caught by the rigidness of the hook. The fingertip was amputated.
An employee was using a circular saw to cut the cap off an aluminum bulkhead of a trailer that was being manufactured. The saw kicked, lacerating his hand and resulting in the amputation of his left middle and ring fingertips.
An employee was stacking concrete blocks for a concrete bunker. As a block was swinging into place, the employee's left leg was pinched between two blocks, resulting in injuries to his left heel and lower leg.
An employee was climbing a ladder to inspect a vent in a restaurant dining area. The ladder slid out on the floor and the employee fell approximately 12 feet onto the ladder and the floor. He was hospitalized with a dislocated shoulder and a back injury.
An employee was filtering a fryer with a fryer filter machine. After going around the corner and then returning to the fryers, the employee stepped into the filter machine. The hot oil burned the employee's right ankle, and the employee was hospitalized.
An employee was cleaning out corn from a grain bin. The sweep auger in the bin was activated and caught his trouser leg. His leg was pulled into the auger, which injured his calf and caused leg fractures and lacerations.