Caught in running equipment or machinery, n.e.c. · Fractures
At a glance
Federal OSHA recorded a severe workplace injury
at Sandler Nonwoven Corp., 401 Airport Road, PERRY, GEORGIA 31069
on — Fractures, affecting the hand(s), unspecified.
Final narrative
An employee was checking a non-woven fabric machine when he dropped a pad between two rollers. As he attempted to retrieve the pad, his left hand was crushed and fractured between the moving rollers. The machine was unguarded at the time.
HospitalizedHand(s), unspecifiedSpecial process machinery, n.e.c.
An employee was feeding material through the water jet section of a roller machine during the retract process. The employee stepped backward away from the machine and his right hand slid into a gap resulting in amputations to one or more fingers.
An employee was removing the bolts of a calender roller. When the last bolt was removed, the roller fell and pinched the employee's finger against the bearing housing. The employee suffered an amputation to a finger.
Employees were assembling and testing a butterfly valve unit and actuator combo. When the unit was function tested with air, the valve gate closed on an employee's left thumb resulting in a fracture and laceration.
An employee was doing a daily inspection of the sifter screen on a mixer when the mixer line activated. The armature for the screen struck the employee's right wrist. Their wrist was cut and their hand was fractured.
An employee was doing a dry run during the setup of an ice cream machine. The machine indexed and the filler head amputated the employee's left middle finger above the last knuckle.
An employee was on a 3-foot ladder guiding cable onto a spool during installation on an overhead door. As the control box was jogged, the employee's hand was caught between the cable and spool, resulting in a wrist and hand fracture.
More severe injuries in this industry (NAICS 313230)
An employee was working from a ladder and adjusting a spreader guide roller with a T-handle Allen wrench. The employee came into contact with an electrical junction box/wires, was shocked, and fell off the ladder to the concrete floor. He suffered a broken right-side rib, a puncture in the right lung, and an electrical shock burn to the right palm.
On January 3, 2025, at approximately 11:35 AM, an employee was inspecting and changing spin pumps on a line. He was using an impact gun to remove the bolts when the pressure sprayed hot polymer on his head, face, and arms resulting in burns. The employee was hospitalized.
An employee was doing quality control work to get the right thickness of the material. She contacted a component on a mill and sustained the amputation of four fingers on her right hand.
An employee was servicing the belt on a fan when their right ring finger became caught between the belt and pulley. They sustained amputation of the fingertip. The machine was locked out at the time.
An employee was helping to lift the grating from a floor draining system when the grating slipped and landed on his hand, resulting in the amputation of his right middle finger at the first joint.
During a workshop meeting in a hotel, an employee heard a drilling noise, so he walked outside to see what it was. An explosion occurred (possible gas line) and his face, ear, and hair were burned. He also fell and sustained a pelvic fracture.
An employee was using a tool to remove a rag from a roll on the tube mill. The roll pulled the tool and the employee's right hand into the roll, resulting in a partial amputation of the little finger and a fracture to the index finger.