Pentair, Inc

When a conveyor was activated, an employee's right hand was caught between the indexing mechanism and the conveyor. Three of the employee's fingers were amputated.

An employee was tossing a damaged toilet into a compactor. The toilet bounced off the compactor and lacerated the employee's right wrist, cutting an artery and tendon.

An employee was operating a hydraulic jack to bend a frame when the jack came loose and struck the employee. They were hospitalized for a spleen injury.

A truck had been towed into the shop with a flat tire and a blown airbag. An employee checked the tire for damage and was airing the tire. The employee was installing the valve core when the bead slipped off the rim. Air escaped, and the aluminum wheel struck the employee's head and face. The employee became unresponsive and was bleeding.

On December 14, 2023, at 8:40 p.m., three employees were inspecting milling machines for startup. A few of the sleeves on the mill drum needed to be changed out. The injured employee was trying to input a sleeve on the mill drum using a hammer. The hammer hit the edge of the drum, which caused a metal piece to splinter off and strike the employee's cheek just below the left eye. The metal splinter embedded in the back of their eye socket, resulting in pain, swelling, and bleeding that required hospitalization.

An employee was pushing a line of carts into a vestibule when the door cable snapped and struck his right ankle. The employee suffered a fracture that required surgery and hospitalization.

On March 26, 2025, an employee was standing on a work table that was 23" high to abrasive blast the upper section of a pump. When he stepped off the table with his left leg, his left knee gave out and he fell to the ground, landing on his right hip. The employee sustained a displaced right hip fracture near the joint and was hospitalized.

An employee was pressure washing a suspended part when the part started spinning. The employee manually stopped the part from spinning when his hand was caught in the pressurized water blast. The employee was hospitalized with a laceration.

An employee was dumping a "self-dumping chip bin" (on the forks of a forklift) into a 3- or 4-foot-tall dumpster. The bin tilted forward. Thinking it was going to slide off the forks, the employee reached to grab the bottom of the bin to stop it. The bin then rotated back. The tip of the employee's left middle finger, from the first knuckle past his fingernail, was caught between the bin and the top of the forklift pocket frame. The fingertip was amputated just above the first knuckle.

An employee suffered two fingertip amputations while working at a plant.

An employee was operating a stand-up forklift in the warehouse when the forklift spun and the employee was caught between the forklift and metal shelving. The employee sustained multiple broken ribs.

An employee was working to remove a product blockage from a piece of equipment. The employee was struck by a metal bar near the deck of the pin mixer equipment and sustained blunt force trauma to the torso.

An employee was moving a rack onto a lower conveyor in the south heat treat area when their finger got caught between the part tray and the rollers, resulting in a fingertip fracture and amputation.

An employee was climbing a ladder to get on top of the breakroom. The ladder slipped, causing him to fall to the ground. The employee sustained fractures to his upper back, left foot, and ankle.

Two employees were removing a circuit breaker. The injured employee was using wrenches in the removal process. One of the wrenches contacted an adjacent door, resulting in an arc flash. The employee suffered burns to their neck, face, and ear, as well as momentary vision loss due to the flash.

An employee bent over to pick up a rubber mat from the ground. When he grabbed the corner of the mat, a rattlesnake hidden under it bit his left middle finger near the first knuckle. He was hospitalized.