Struck by falling object or equipment, unspecified · Crushing injuries
At a glance
Federal OSHA recorded a severe workplace injury
at Coreslab Structures Texas, Inc., 15916 Anderson Mill Road, CEDAR PARK, TEXAS 78613
on — Crushing injuries, affecting the hand(s), unspecified.
Final narrative
An employee was guiding a concrete form that was being removed with a crane when it became unstable and swung into the steel guide beam, knocking it to the ground with the employee. The steel beam came down on and crushed the employee's hand.
HospitalizedHand(s), unspecifiedBeams-unattached metal
More severe injuries at Coreslab Structures Texas, Inc.
A crew was working to untangle a spool of 1/2-inch wire cable. One employee's left thumb became entangled in the cable, causing an amputation/avulsion. The employee was hospitalized.
An employee was setting a stress jack into place, getting ready to stress the cable. His hand was around the ram and his thumb was in the cylinder channel against the back wall. The stressing operator started moving the ram cylinder into position and the cylinder crushed the tip of the employee's left thumb against the back wall.
An employee was securing a load of precast concrete on a trailer. He fell and was knocked unconscious, suffering a concussion, a laceration to the left side of the head, and a skull fracture.
A dunnage board for setting concrete moved, and an employee's left hand was caught between the board and a concrete panel. The employee's middle and ring fingertips were amputated.
An employee was in the process of cleaning and setting a 20' steel siderail for a mold while standing on top of the 2.5' high mold. The employee stuck a piece of rebar into a hole of the mold to adjust the siderail's position in the mold. The employee pulled on the rebar and it came out of the hole, causing the employee to fall to the ground and fracture the right femur.
An employee was unloading 30-foot 2-inch barrels from a pan holding about 20 barrels. The barrels tipped over, striking and breaking both of the employee's lower legs.
An employee was in a sandblasting area, preparing the surface of a plate heat exchanger frame for painting. The frame fell on the employee, who suffered fractures to vertebrae, the neck, pelvis, and rib cage; and punctured lungs.
An employee was stacking concrete blocks for a concrete bunker. As a block was swinging into place, the employee's left leg was pinched between two blocks, resulting in injuries to his left heel and lower leg.
An employee was patching precast concrete. He fell from a concrete wall support to the ground due to wind. He was hospitalized with fractures to his left ankle and right knee.
An employee was cutting wood on a table saw when the wood got jammed. While clearing the jam, the wood moved forward and his left index and middle fingertips were amputated.
After cutting a slab of beef short ribs, an employee turned to grab the pieces he had cut and his right hand contacted the saw blade. The employee sustained an amputation to his right index finger.
An employee was unloading a carpet pad from a truck when they fell from the truck dock to the concrete below, resulting in five fractured ribs and an injury to their left lung.
An employee was walking up a walkway to enter a building through the back entrance when she tripped over the lip of the cement ramp. The employee fell and sustained a fractured right hip.