Zalkin Americas

An employee was using a saw to cut a piece of concrete when the piece gave way and pushed the saw into the employee's leg. The employee's leg was lacerated, requiring stitches and hospitalization.

An employee was using a utility knife to cut honeycomb paper when the knife amputated their left index fingertip.

An employee was cleaning a resident's chimney. While using a drill, the employee's glove became caught in the drill and their finger was fractured.

An employee was grinding some hardfacing on a bulldozer blade when the 9-inch grinder kicked back and lacerated his left leg above the knee. The employee was hospitalized and required surgery.

An employee was operating a rotating tool to place thread protectors on the end of pipe. Her left hand was on the rotating part of the tool when the tool engaged, resulting in a left forearm fracture and a thumb laceration.

An employee was working in the shipping/receiving area on a packing paper dispenser that was jammed. When the paper came free, the blade pulled the paper in and pulled the employee's hand in too, amputating about a quarter of the right middle fingernail and the top of the finger.

On June 27, 2025, at approximately 7:00 PM, an employee was operating a cell that presses rings on a cylinder and welds the rings on. The cylinder was moving between the welding station and the press station when it fell off the holder. The employee went to place the cylinder back on the holder when the cell cycled and the compression holder crushed their right hand. The employee's middle, ring, and little fingers were crushed.

An employee was working on a hydraulic cylinder at his work table. While he was removing a bleeder plug to reduce the pressure, the 3/8-inch steel plug was pushed out by oil pressure. The plug impacted his wrist, causing an abrasion where hydraulic oil went into his arm. The employee was hospitalized.

An employee was pulling a steel cart backward when his left ring finger was crushed between the cart and another steel cart, resulting in amputation of the fingertip.

An employee was using a hydraulic press to repair a hydraulic tool that was stuck in the open position. Upon adding downward pressure from the hydraulic press, the tool's hydraulic quick coupler broke and released the ball bearing inside the coupler. The ball bearing struck the employee in the abdomen, resulting in lacerations and abrasions. The ball bearing also penetrated the employee's abdomen.

After cutting a slab of beef short ribs, an employee turned to grab the pieces he had cut and his right hand contacted the saw blade. The employee sustained an amputation to his right index finger.

An employee was unloading a carpet pad from a truck when they fell from the truck dock to the concrete below, resulting in five fractured ribs and an injury to their left lung.

An employee was inspecting flares processes. The employee received burns to the front side of the body, face and arm from the flares.

An employee was removing plastic material from a production line when the machine cycled and amputated his left index, ring, and little fingers.

An employee was walking up a walkway to enter a building through the back entrance when she tripped over the lip of the cement ramp. The employee fell and sustained a fractured right hip.