QB JOHNSON MANUFACTURING

An employee was tossing a damaged toilet into a compactor. The toilet bounced off the compactor and lacerated the employee's right wrist, cutting an artery and tendon.

An employee was operating a hydraulic jack to bend a frame when the jack came loose and struck the employee. They were hospitalized for a spleen injury.

A truck had been towed into the shop with a flat tire and a blown airbag. An employee checked the tire for damage and was airing the tire. The employee was installing the valve core when the bead slipped off the rim. Air escaped, and the aluminum wheel struck the employee's head and face. The employee became unresponsive and was bleeding.

On December 14, 2023, at 8:40 p.m., three employees were inspecting milling machines for startup. A few of the sleeves on the mill drum needed to be changed out. The injured employee was trying to input a sleeve on the mill drum using a hammer. The hammer hit the edge of the drum, which caused a metal piece to splinter off and strike the employee's cheek just below the left eye. The metal splinter embedded in the back of their eye socket, resulting in pain, swelling, and bleeding that required hospitalization.

An employee was pushing a line of carts into a vestibule when the door cable snapped and struck his right ankle. The employee suffered a fracture that required surgery and hospitalization.

An employee was disassembling a scrap headliner above a dashboard to recover automotive parts when their screwdriver slipped and contacted their right hand. The employee suffered a laceration that resulted in nerve damage, requiring surgery.

An employee was assisting in the removal of a filter dryer assembly from a support stand. The filter dryer was attached to an overhead crane during the time the mounting bolts were being removed from the support stand. Once the filter dryer was completely disconnected from the support stand, the unit became top-heavy and tipped over onto the employee causing a fracture to their right foot and lacerations to their upper right arm and upper back.

An employee was removing a 2,700-pound piece of metal from a horizontal mill. They were walking away from the machine when they slipped and tried to catch themselves on the metal, causing the large piece of metal to fall down onto their ankle. They sustained a compound fracture to their right leg.

An employee was standing on an elevated, unsecured platform to assist with the rigging and removal of a vessel from a work area when the platform tipped and they fell to the concrete floor, fracturing their pelvis and elbow.

An employee was repairing a CNC machine. A tool fell from the operator platform into the pit area below, a distance of approximately 3.5 feet. The employee descended into the pit using the access stairs to retrieve the tool. The employee's feet slid out from under him while stepping onto the cover, resulting in a fall and a fractured left hip that required hospitalization.

An employee was helping to move a 1,300-pound coil on a cart. The steel caster hit a crack in the concrete, the weld holding the caster onto the cart broke, and the coil and cart tipped over onto the employee. He was hospitalized with a laceration on his forehead and a pelvic fracture on his right side.

An employee was working in the food service warehouse when he experienced chest pain, difficulty breathing, and lost consciousness. The employee sustained carbon monoxide poisoning.

An employee was cutting a piece of metal rod with a metal cutting machine. His right middle finger became caught between the rod and the machine's table. The employee's fingertip was partially amputated.

An employee was working at her desk. She went to stand up and fell to the floor beside the desk. The employee sustained a hip displacement and required surgery.

An employee was processing wood boards at a chop saw when the saw malfunctioned and the blade cut her left hand and fingers. She was hospitalized and her little finger was surgically amputated.