Injured by object held or wielded by person · Cuts, lacerations, punctures without injury to internal structures
At a glance
Federal OSHA recorded a severe workplace injury
at AVANZAR INTERIOR TECHNOLOGIES, 1 LONE STAR PLACE BLDG 41, SAN ANTONIO, TEXAS 78264
on — Cuts, lacerations, punctures without injury to internal structures, affecting the Hand(s), finger(s) unspecified.
Final narrative
An employee was disassembling a scrap headliner above a dashboard to recover automotive parts when their screwdriver slipped and contacted their right hand. The employee suffered a laceration that resulted in nerve damage, requiring surgery.
An employee was removing packaging from a roll of printing substrate. The blade of their utility knife got stuck. The employee used both hands to free the knife and the blade partially amputated their left little fingertip.
An employee was disassembling a pressurized unit using a driver drill. When the unit was disassembled, it caused a kickback from the tube head, causing the drill to strike the employee's left forearm. They sustained a diaphyseal fracture to their left radius and ulna, which required surgery.
While working at a customer's residence, an employee was cutting tape with a box cutter to wrap insulation for a piece of pipe. The box cutter struck a hardened object within the wall causing it to bounce back and puncture the employee's right eye. The employee was hospitalized.
An employee was using the pipe-and-wrench method to loosen a seized bolt on a roof truss. A technician from another company was on the other side of the truss doing the same action with the same method. The employee's socket slipped off the bolt and his left hand was crushed against the truss, resulting in injuries to the index and little fingers, requiring hospitalization, surgery, and amputation of the index finger.
More severe injuries in this industry (NAICS 333298)
An employee was assisting in the removal of a filter dryer assembly from a support stand. The filter dryer was attached to an overhead crane during the time the mounting bolts were being removed from the support stand. Once the filter dryer was completely disconnected from the support stand, the unit became top-heavy and tipped over onto the employee causing a fracture to their right foot and lacerations to their upper right arm and upper back.
An employee was removing a 2,700-pound piece of metal from a horizontal mill. They were walking away from the machine when they slipped and tried to catch themselves on the metal, causing the large piece of metal to fall down onto their ankle. They sustained a compound fracture to their right leg.
An employee was standing on an elevated, unsecured platform to assist with the rigging and removal of a vessel from a work area when the platform tipped and they fell to the concrete floor, fracturing their pelvis and elbow.
An employee was repairing a CNC machine. A tool fell from the operator platform into the pit area below, a distance of approximately 3.5 feet. The employee descended into the pit using the access stairs to retrieve the tool. The employee's feet slid out from under him while stepping onto the cover, resulting in a fall and a fractured left hip that required hospitalization.
After cutting a slab of beef short ribs, an employee turned to grab the pieces he had cut and his right hand contacted the saw blade. The employee sustained an amputation to his right index finger.
An employee was unloading a carpet pad from a truck when they fell from the truck dock to the concrete below, resulting in five fractured ribs and an injury to their left lung.
An employee was walking up a walkway to enter a building through the back entrance when she tripped over the lip of the cement ramp. The employee fell and sustained a fractured right hip.