Struck by suspended or swinging objects n.e.c. · Fractures
At a glance
Federal OSHA recorded a severe workplace injury
at GMM Pfaudler U.S Inc, 1000 WEST AVENUE, ROCHESTER, NEW YORK 14611
on — Fractures , affecting the Foot (feet) excluding toes.
Final narrative
An employee was assisting in the removal of a filter dryer assembly from a support stand. The filter dryer was attached to an overhead crane during the time the mounting bolts were being removed from the support stand. Once the filter dryer was completely disconnected from the support stand, the unit became top-heavy and tipped over onto the employee causing a fracture to their right foot and lacerations to their upper right arm and upper back.
Hospitalized Foot (feet) excluding toes Filtering and sequestration machinery
An employee was standing on an elevated, unsecured platform to assist with the rigging and removal of a vessel from a work area when the platform tipped and they fell to the concrete floor, fracturing their pelvis and elbow.
An employee was walking into the motor control center (MCC) room when his right ring finger was caught in the hinge of a doorway. He sustained an open phalanx fracture, which resulted in a partial amputation above the first knuckle.
An employee was stacking concrete blocks for a concrete bunker. As a block was swinging into place, the employee's left leg was pinched between two blocks, resulting in injuries to his left heel and lower leg.
An employee was using a crane to move a 44-foot, 3,343-pound I-beam. As the beam was moving west, it straightened out (north to south), beginning to swing south toward the northwest corner of a building. The crane then sent the beam southward, directly toward the corner of the building. The beam caught the tips of the employee's left index, middle, and ring fingers against the building. The last joints of the middle and ring fingers were amputated, and the last joint of the index finger was partially crushed.
An employee was placing a board on top of a bundle of steel tubing. A crane was moving a bundle of steel that struck the employee and caught them against another bundle of steel tubing. The employee sustained a crushing injury and hematoma to the right upper leg.
Employees were using a crane to lower large tree stems and branches while removing limbs and branches from the load. This caused the load to shift and strike an employee in the back, resulting in a hematoma on the lower left part of their back and a fractured ankle.
More severe injuries in this industry (NAICS 333298)
An employee was disassembling a scrap headliner above a dashboard to recover automotive parts when their screwdriver slipped and contacted their right hand. The employee suffered a laceration that resulted in nerve damage, requiring surgery.
An employee was removing a 2,700-pound piece of metal from a horizontal mill. They were walking away from the machine when they slipped and tried to catch themselves on the metal, causing the large piece of metal to fall down onto their ankle. They sustained a compound fracture to their right leg.
An employee was standing on an elevated, unsecured platform to assist with the rigging and removal of a vessel from a work area when the platform tipped and they fell to the concrete floor, fracturing their pelvis and elbow.
An employee was repairing a CNC machine. A tool fell from the operator platform into the pit area below, a distance of approximately 3.5 feet. The employee descended into the pit using the access stairs to retrieve the tool. The employee's feet slid out from under him while stepping onto the cover, resulting in a fall and a fractured left hip that required hospitalization.
An employee was operating a battery-powered broom to clean demolition debris off the top of the outermost bridge girder. The girder was approximately 11 feet above the demolition scaffold below. The employee fell approximately 8 feet to wind bracing below. The employee was hospitalized with a pelvis/tailbone fracture. Fall protection was in place at the time.
An employee slipped while descending in a stairwell, fell, and suffered multiple contusions/bruises to the head, neck, shoulders, knees, and back. She was hospitalized.
An employee was directing trucks as they entered and left a highway work zone. A vehicle struck them, resulting in multiple fractures and other injuries. The employee was hospitalized.