Valk Manufacturing Company Incorporated

An employee was unloading a trailer when a box fell and struck the employee in the face. The employee suffered a concussion and was hospitalized.

An employee had been cutting lumber for a shed wall. A load of 16-foot trim pieces fell onto the employee causing vertebrae and ankle fractures.

An employee was unloading 30-foot 2-inch barrels from a pan holding about 20 barrels. The barrels tipped over, striking and breaking both of the employee's lower legs.

An employee was in a sandblasting area, preparing the surface of a plate heat exchanger frame for painting. The frame fell on the employee, who suffered fractures to vertebrae, the neck, pelvis, and rib cage; and punctured lungs.

An employee was installing doors when one of the doors fell on him, fracturing his lower leg. The employee was hospitalized.

An employee was disassembling a scrap headliner above a dashboard to recover automotive parts when their screwdriver slipped and contacted their right hand. The employee suffered a laceration that resulted in nerve damage, requiring surgery.

An employee was assisting in the removal of a filter dryer assembly from a support stand. The filter dryer was attached to an overhead crane during the time the mounting bolts were being removed from the support stand. Once the filter dryer was completely disconnected from the support stand, the unit became top-heavy and tipped over onto the employee causing a fracture to their right foot and lacerations to their upper right arm and upper back.

An employee was removing a 2,700-pound piece of metal from a horizontal mill. They were walking away from the machine when they slipped and tried to catch themselves on the metal, causing the large piece of metal to fall down onto their ankle. They sustained a compound fracture to their right leg.

An employee was standing on an elevated, unsecured platform to assist with the rigging and removal of a vessel from a work area when the platform tipped and they fell to the concrete floor, fracturing their pelvis and elbow.

An employee was repairing a CNC machine. A tool fell from the operator platform into the pit area below, a distance of approximately 3.5 feet. The employee descended into the pit using the access stairs to retrieve the tool. The employee's feet slid out from under him while stepping onto the cover, resulting in a fall and a fractured left hip that required hospitalization.

An employee was closing a door when the door closed on their right index finger, resulting in a fingertip amputation.

An employee was walking into the motor control center (MCC) room when his right ring finger was caught in the hinge of a doorway. He sustained an open phalanx fracture, which resulted in a partial amputation above the first knuckle.

An employee was changing the spacing on a telehandler's forks. A fork slipped, and the employee's left index finger was caught between it and the mast. The fingertip was medically amputated at the first knuckle.

An employee was pulling down a broken skid with a forklift. When the employee backed up the forklift to get the forks out of the skid he pulled down, he contacted the forks of another parked forklift, fracturing both of his legs. He was hospitalized.

An employee was carrying cups back to the kitchen when her foot got caught on a cart and she fell face-first. During the fall, a piece of glass from a cup cut the inside of her mouth, severing an artery. She also sustained a laceration on her lower lip. The employee was hospitalized.