Caught in or compressed by equipment or objects, unspecified · Amputations
At a glance
Federal OSHA recorded a severe workplace injury
at Hastings HVAC, Inc, 3606 Yost Ave, HASTINGS, NEBRASKA 68901
on — Amputations, affecting the fingertip(s).
Final narrative
An employee was assembling a sheave and amputated the left pinky fingertip when it was caught between the belt and the metal edge of the sheave groove.
An employee had been setting up a machine for production. The employee reached into the die to check a bolt that may have been loose. At this time, the controls were engaged resulting in a right middle finger amputation.
An employee was changing mud cups in the hopper cylinders of a concrete pump truck. The cylinders moved and three of the employees fingers were amputated.
An employee was standing on the rig floor next to a polishing unit. His hand was placed on the polishing unit when the pump was lowered, resulting in amputation of their right thumb, ring, and middle fingertips.
An employee was using air to blow out the air wash to the blender and grinder station. As the employee reached to verify that the air wash was clean, the unit pinched and amputated their fingertip.
An employee was retrieving a lost drill pipe with a lifting bail when their left thumb got pinched between the table and handle of the lifting bail while trying to re-thread the pipe to lift it out. The employee suffered an amputation to the left thumb.
An employee was removing a core chuck from a stationary roll when their right ring finger was pinched between the chuck and the roll. The employee's fingertip was amputated.
More severe injuries in this industry (NAICS 333412)
An employee was at the brake press when the press was activated, causing the ram to move. Two fingertips on his right hand were crushed between the dies and partially amputated.
An employee was loading a piece of round aluminum into a CNC auto-spinning machine. Their left thumb was crushed between the tail block, the aluminum part, and the mandrel. The distal tip of the thumb was amputated.
An employee was seated at a press brake and was putting strips of steel (2-inches by 2-feet) into a brake press machine. The machine actuated and his right ring finger was crushed between the upper die and the steel material. The finger was amputated through the base of the nailbed.
An employee was using a manual spinning machine to cut out the center of an inlet. The cutter bar struck his neck and jaw, breaking the jaw and injuring an artery in his neck.
An employee was climbing a fence in pursuit of two people who had been trying to break into a facility. He fell from the fence, suffered a broken left leg, and was hospitalized.
An employee was stacking concrete blocks for a concrete bunker. As a block was swinging into place, the employee's left leg was pinched between two blocks, resulting in injuries to his left heel and lower leg.
An employee was climbing a ladder to inspect a vent in a restaurant dining area. The ladder slid out on the floor and the employee fell approximately 12 feet onto the ladder and the floor. He was hospitalized with a dislocated shoulder and a back injury.
An employee was filtering a fryer with a fryer filter machine. After going around the corner and then returning to the fryers, the employee stepped into the filter machine. The hot oil burned the employee's right ankle, and the employee was hospitalized.
An employee was cleaning out corn from a grain bin. The sweep auger in the bin was activated and caught his trouser leg. His leg was pulled into the auger, which injured his calf and caused leg fractures and lacerations.