MOBILE, ALABAMA—
Tractor & Equipment Company
Struck by falling object or equipment, unspecified · Fractures
At a glance
Federal OSHA recorded a severe workplace injury at Tractor & Equipment Company, 2100 East I-65 Service Road North, MOBILE, ALABAMA 36633 on — Fractures, affecting the toes(s), toenail(s).
Final narrative
An employee was using a prybar to help another employee remove a quick coupler from a wheel. When the coupler came free, it landed on the employee's right foot, breaking every toe. The employee was hospitalized. Steel-toed boots were not being worn at the time of the incident.
More severe injuries at Tractor & Equipment Company
PANAMA CITY, FLORIDA—
Tractor & Equipment Company
An employee was filling a pressure washer with gasoline when the vapors ignited, resulting in the employee suffering burns to his face, hands, and arms.
KENNESAW, GEORGIA—
Tractor & Equipment Company
An employee was using a torch to remove a broken bolt from inside a roller drum. Prior to this, brake cleaner had been used inside the roller drum. The employee was inside the roller drum when a flash fire occurred and the employee sustained burns to their face and arms.
GREAT FALLS, MONTANA—
Tractor & Equipment Company
An employee was pressure washing and lost control of the belly pan and the hold-down loop which smashed their finger. The first digit of the right pinky finger was amputated.
BILLINGS, MONTANA—
Tractor & Equipment Company
An employee was working on a large wheel loader, installing a ring and pinion in an axle. His left ring finger became caught between the ring and pinion and he sustained a fingertip amputation.
BROOKWOOD, ALABAMA—
Tractor & Equipment Company
An employee was replacing a left hand drive on a bulldozer using a boom truck and suffered a back injury.
View Tractor & Equipment Company's full OSHA safety record →
Similar incidents · Same event type
FORNEY, TEXAS—
Amazon FTW5
An employee was unloading a trailer when a box fell and struck the employee in the face. The employee suffered a concussion and was hospitalized.
EL PASO, TEXAS—
Tuff Shed, Inc.
An employee had been cutting lumber for a shed wall. A load of 16-foot trim pieces fell onto the employee causing vertebrae and ankle fractures.
MIDLAND, TEXAS—
Lufkin Industries
An employee was unloading 30-foot 2-inch barrels from a pan holding about 20 barrels. The barrels tipped over, striking and breaking both of the employee's lower legs.
CYPRESS, TEXAS—
Cy-Fair Coatings Inc
An employee was in a sandblasting area, preparing the surface of a plate heat exchanger frame for painting. The frame fell on the employee, who suffered fractures to vertebrae, the neck, pelvis, and rib cage; and punctured lungs.
MIAMI, FLORIDA—
Rodriguez General Carpentry
An employee was installing doors when one of the doors fell on him, fracturing his lower leg. The employee was hospitalized.
More severe injuries in this industry (NAICS 423830)
MIDLAND, TEXAS—
TRC Services of Texas INC
An employee was sorting sucker rods. His right hand was caught in the area where the rod hits up against the frame and his index fingertip was amputated just below the nail.
DEER PARK, TEXAS—
Onpoint Industrial Services Hiring Center
An employee was using a powered miter saw to cut 2x4's. The saw blade hit something inside a board (possibly a hidden nail) and jumped, causing a laceration to the employee's left forearm. The employee was hospitalized with soft tissue and tendon injuries that required surgery.
TULSA, OKLAHOMA—
S&R Compression, LLC
A crane had been used to set a steel plate on a steel frame. An employee was trying to remove a clamp from the plate when the plate fell and crushed the tip of his left little finger. The employee sustained a fingertip amputation.
GIRARD, OHIO—
Morgan Engineering Systems, Inc
An employee was operating a scissor lift, raised to a height of about 15 feet, to inspect an overhead crane rail. The crane itself was being moved. Its hook swung into the scissor lift s arms, causing the lift to tip over onto its side, which in turn caused the lift and the employee to fall to the floor. The employee suffered injuries including broken ribs, spinal fractures, scapula fractures, and internal injuries.
NORTH CHARLESTON, SOUTH CAROLINA—
Fairbanks Morse, LLC
A technician was operating a crane hoist to lift/remove a cylinder head from the main engine (port). The load was lifted at an angle, causing the cylinder head to get stuck on the cylinder head studs. When it became free from the studs, the cylinder head swung. It struck the technician and caught them against the cabinet door. This resulted in an amputation of their left index fingertip at the distal knuckle.
More severe injuries in ALABAMA
GENEVA, ALABAMA—
Sysco Gulf Coast, LLC
An employee was traveling down the maintenance aisle of a warehouse on a single-pallet front rider jack. The jack malfunctioned, causing the brakes to apply; the employee fell forward onto the concrete warehouse floor. The employee suffered an injury to the left leg and was hospitalized, requiring surgery.
BESSEMER, ALABAMA—
Norflex, Inc.
An employee was operating a metal roller machine to roll a small piece of metal. The employee's right index finger became caught between the metal and the machine, and the fingertip was amputated.
ANNISTON, ALABAMA—
Ampler Pizza II LLC
An employee was shot in the leg with a pistol during an altercation with two people who had entered the store without permission.
ATMORE, ALABAMA—
Birdsong Corporation
An employee was directing a truck driver to a dump site when the truck's peanut trailer slipped off the kingpin. As the trailer fell, a ladder attached to it lacerated the employee's ear. The employee was hospitalized.
ROGERSVILLE, ALABAMA—
Pilgrims
An employee was unloading a forklift from a trailer to the ground. The employee was climbing down the ladder of the trailer when their foot slipped through one of the rungs, causing them to fall backward onto the forklift forks. The employee was hospitalized for fractured ribs.