Nonroadway collision with object other than vehicle, n.e.c. · Bruises, contusions
At a glance
Federal OSHA recorded a severe workplace injury
at The Boeing Company, Route 291 & Stewart Avenue, RIDLEY PARK, PENNSYLVANIA 19078
on — Bruises, contusions, affecting the head, unspecified.
Final narrative
An employee was operating a forklift when its forks hit a trench plate. The employee fell into the forklift's shield, suffering a head contusion and neck pain. The employee was hospitalized.
HospitalizedHead, unspecifiedForklift, order picker, platform truck-powered
Two employees fell from an access bridge while entering an aircraft to perform maintenance. They landed on the ground about 20 feet below, where one of them lost consciousness. One employee sustained a fractured knee and another employee sustained a back strain/sprain. Both employees were hospitalized.
An employee was cleaning up a fuel barn. They were winding up a power cord when they tripped on the cord and fell to the concrete floor, resulting in a fractured left wrist that required hospitalization and surgery.
In the flight line area, an employee was on a work stand platform conducting repairs to an aircraft. While transitioning to another location, he stepped over another employee and lost his balance. The employee reached for the railing to catch themselves, fell, and tore his right bicep. The employee was hospitalized for surgery.
Employees were working on a machine overhaul. They were using a hydraulic jack to move the machine laterally into position. The machine shifted and pinched an employee's hand against the concrete floor. A fingertip was amputated.
An employee was walking in the breezeway outside the orbital processing facility when a vent hood on two wooden supports tipped over onto them. The employee was trapped underneath the vent hood, resulting in hospitalization for fractures to their rib and sternum.
An employee was driving a cart around the driving range to pick up golf balls. The vehicle struck an in-ground target causing the employee to strike his forehead on the windshield. The employee was hospitalized with fractures to their nose and cheekbone and lacerations to their head and hands.
An employee was operating a picker when it struck a stack of pallets. His body moved forward and he struck his face on the computer monitor in the vehicle, resulting in a concussion, laceration, and blurry vision.
An employee was driving a lift in reverse through an aisle while the lift was loaded with a headboard. The headboard caught merchandise in the aisle racks, causing it to shift and contact the employee's right leg. The employee suffered a broken leg.
An employee was driving a utility task vehicle (UTV) through the parking lot to the boat yard to meet a co-worker. The UTV and slid into a curb, causing it to flip on its side and land on the employee's leg, resulting in a broken leg.
On December 7, 2023, an employee was driving an order picker down an aisle when the mast of the vehicle struck a material pan that was hanging out of the rack. The pan fell and struck the employee, resulting in rib fractures and a spleen laceration.
More severe injuries in this industry (NAICS 336411)
A pressurized aircraft nose landing gear strut assembly was being disassembled. The gland nut dislodged under pressure and made contact with an employee's left hand, breaking it.
A metal tooling base was being moved by a forklift when the load shifted. An employee who was assisting went to stabilize the load and prevent it from sliding off the forks. The C-channel of the base crushed the employee's left hand against the concrete ground, resulting in the amputation of their third and fourth fingers.
An employee was working on a tool platform (47.5" tall) and was transitioning around to the other side when they lost balance and fell to the concrete floor. The employee was hospitalized with fractures to seven ribs and their elbow.
On August 19, 2025, at 6:30 a.m., an employee sat in the rear bench seat of a golf cart ahead of being driven to a parking lot. When the golf cart began to move, he fell off the cart and onto the ground, resulting in a fractured right hip.
An employee was walking into the motor control center (MCC) room when his right ring finger was caught in the hinge of a doorway. He sustained an open phalanx fracture, which resulted in a partial amputation above the first knuckle.
An employee was changing the spacing on a telehandler's forks. A fork slipped, and the employee's left index finger was caught between it and the mast. The fingertip was medically amputated at the first knuckle.
An employee was pulling down a broken skid with a forklift. When the employee backed up the forklift to get the forks out of the skid he pulled down, he contacted the forks of another parked forklift, fracturing both of his legs. He was hospitalized.
An employee was carrying cups back to the kitchen when her foot got caught on a cart and she fell face-first. During the fall, a piece of glass from a cup cut the inside of her mouth, severing an artery. She also sustained a laceration on her lower lip. The employee was hospitalized.