WICHITA, KANSAS—
Spirit Aerosystems, Inc
Struck by suspended or swinging objects n.e.c. · Amputations involving bone loss
At a glance
Federal OSHA recorded a severe workplace injury at Spirit Aerosystems, Inc, 3801 S. Oliver, WICHITA, KANSAS 67210 on — Amputations involving bone loss, affecting the Other finger(s) n.e.c..
Final narrative
A metal tooling base was being moved by a forklift when the load shifted. An employee who was assisting went to stabilize the load and prevent it from sliding off the forks. The C-channel of the base crushed the employee's left hand against the concrete ground, resulting in the amputation of their third and fourth fingers.
More severe injuries at Spirit Aerosystems, Inc
WICHITA, KANSAS—
Spirit Aerosystems Inc.
An employee was working on a tool platform (47.5" tall) and was transitioning around to the other side when they lost balance and fell to the concrete floor. The employee was hospitalized with fractures to seven ribs and their elbow.
WICHITA, KANSAS—
Spirit Aerosystems, Inc.
An employee was working inside the access panel of a sliding door when the door began to shut. The employee's left middle finger was pulled into the chain and sprocket, resulting in amputation to the middle knuckle.
WICHITA, KANSAS—
SPIRIT AEROSYSTEMS, INC.
An employee was installing a rail on a machine. The roller pack was locked up, causing the chuck to not move. While manually removing the chuck, the rails were damaged. As a result, both the roller pack and the rail needed to be replaced. A fixed magnet from above the rail pulled the rail up and rolled it, pinching the employee's thumb between the rail and the magnet when he tried to install the new rail back to the position. The right thumb tip was amputated.
WICHITA, KANSAS—
Spirit Aerosystems, Inc.
An employee was walking in the shop area, tripped on a work platform, and fell to the floor. The employee was hospitalized for a fractured femur.
WICHITA, KANSAS—
Spirit Aerosystems, Inc.
An employee entered a freight elevator. The inside cage door came down and struck the top of the employee's head causing a contusion.
View Spirit Aerosystems, Inc's full OSHA safety record →
Similar incidents · Same event type
POCONO SUMMIT, PENNSYLVANIA—
Ardent Mills
An employee was walking into the motor control center (MCC) room when his right ring finger was caught in the hinge of a doorway. He sustained an open phalanx fracture, which resulted in a partial amputation above the first knuckle.
NEBRASKA CITY, NEBRASKA—
Concrete Industries Nebraska City
An employee was stacking concrete blocks for a concrete bunker. As a block was swinging into place, the employee's left leg was pinched between two blocks, resulting in injuries to his left heel and lower leg.
AUGUSTA, MAINE—
Cives Steel Company New England
An employee was using a crane to move a 44-foot, 3,343-pound I-beam. As the beam was moving west, it straightened out (north to south), beginning to swing south toward the northwest corner of a building. The crane then sent the beam southward, directly toward the corner of the building. The beam caught the tips of the employee's left index, middle, and ring fingers against the building. The last joints of the middle and ring fingers were amputated, and the last joint of the index finger was partially crushed.
NORTHPORT, ALABAMA—
Hanna Steel Corporation
An employee was placing a board on top of a bundle of steel tubing. A crane was moving a bundle of steel that struck the employee and caught them against another bundle of steel tubing. The employee sustained a crushing injury and hematoma to the right upper leg.
GRAND BAY, ALABAMA—
Tri-State Tree Service LLC
Employees were using a crane to lower large tree stems and branches while removing limbs and branches from the load. This caused the load to shift and strike an employee in the back, resulting in a hematoma on the lower left part of their back and a fractured ankle.
More severe injuries in this industry (NAICS 336411)
ORLANDO, FLORIDA—
Textron Aviation Inc. (Orlando Service Center)
A pressurized aircraft nose landing gear strut assembly was being disassembled. The gland nut dislodged under pressure and made contact with an employee's left hand, breaking it.
WICHITA, KANSAS—
Spirit Aerosystems Inc.
An employee was working on a tool platform (47.5" tall) and was transitioning around to the other side when they lost balance and fell to the concrete floor. The employee was hospitalized with fractures to seven ribs and their elbow.
PALMDALE, CALIFORNIA—
Northrop Grumman Corporation
An employee was adjusting the task lighting on a band saw when their right little finger made contact with the blade, resulting in amputation.
PALMDALE, CALIFORNIA—
Northrop Grumman Corporation
On August 19, 2025, at 6:30 a.m., an employee sat in the rear bench seat of a golf cart ahead of being driven to a parking lot. When the golf cart began to move, he fell off the cart and onto the ground, resulting in a fractured right hip.
WICHITA, KANSAS—
Textron Aviation Inc
An employee was preparing the wing of an aircraft for stripping work and was standing on a four-foot step stand. As the employee was walking on the top platform of the stand, they stepped off the end of the stand and fell to the ground. The employee sustained fractures to their left elbow and left hip.
More severe injuries in KANSAS
WATHENA, KANSAS—
Omya Inc.
An employee was working to remove a product blockage from a piece of equipment. The employee was struck by a metal bar near the deck of the pin mixer equipment and sustained blunt force trauma to the torso.
COFFEYVILLE, KANSAS—
John Deere Coffeyville Works
An employee was moving a rack onto a lower conveyor in the south heat treat area when their finger got caught between the part tray and the rollers, resulting in a fingertip fracture and amputation.
HAVEN, KANSAS—
Haven Steel Products Inc
An employee was climbing a ladder to get on top of the breakroom. The ladder slipped, causing him to fall to the ground. The employee sustained fractures to his upper back, left foot, and ankle.
MINNEOLA, KANSAS—
Vestas-American Wind Tech
Two employees were removing a circuit breaker. The injured employee was using wrenches in the removal process. One of the wrenches contacted an adjacent door, resulting in an arc flash. The employee suffered burns to their neck, face, and ear, as well as momentary vision loss due to the flash.
MEADE, KANSAS—
Alliance Ag and Grain LLC
An employee bent over to pick up a rubber mat from the ground. When he grabbed the corner of the mat, a rattlesnake hidden under it bit his left middle finger near the first knuckle. He was hospitalized.