AMERICAN RAILCAR INDUSTRIES

An employee was hospitalized for dehydration.

On July 10, 2018, an employee was hospitalized for dehydration after finishing his shift insulating tank cars.

An employee was hospitalized with blunt force trauma to the back of the head.

An employee was moving a shaker panel with an overhead crane. A separate shaker panel had been leaned vertically on a wooden crate along the walkway. As the employee was operating the overhead crane, the vibration caused the vertical shaker panel to fall over and strike the employee, fracturing the employee's left tibia.

An employee was manually pushing a center steel partition to align it in a railcar when his foot slipped. He reached up to the edge of the railcar to catch himself while the ram of the hydraulic radar pusher was coming down. The employee's middle and ring fingers on his right hand were caught in a pinch point, resulting in the amputation of his fingertips.

An employee was using a crane. The hook slipped and a fitting fell onto a finger on the employee's left hand causing a fracture and laceration.

An employee was transporting an 800-pound die on a cart from the tool room. The employee was pulling the cart when it struck a metal plate on the floor. This caused the cart to tip forward and the die to slide off the cart. The die struck the employee's left foot and their second toe was amputated.

An employee was using a forklift to load pallets of product on a trailer. He exited the forklift to adjust a pallet by hand. The pallet fell on him, resulting in an injury to the left leg.

An employee was lifting a 500-pound steel counterweight off a pallet using a magnetic hold jib crane. The counterweight detached from the crane and the employee sustained a left foot/toe fracture that required surgery.

An employee was using a pipe wrench to turn a 42-foot-long steel pipe on jack stands to weld the bottom portion. The pipe fell off the stands, striking the injured employee on his left shin. The employee sustained a left leg fracture at the shin area as well as a tibia fracture that required surgery.

An employee was responding to a service request for a cable stripping machine that was making noise and not functioning consistently. While testing its function, the machine contacted the employee s right index fingertip, resulting in a fingertip amputation to the tuft.

An employee was using a handheld cordless electric torque wrench. The tool's reaction arm came into contact with the employee's left hand, causing an amputation to the middle finger above the first knuckle.

On August 6, 2025, an employee was preparing to weld a metal sheet that goes between containers and weighs 800 pounds. The employee was placing a two-foot wooden brace (4 by 4) under the metal, which was being raised by a crane operator using a magnet. The magnet shifted and caused the load to catch the employee's right index fingertip against the wooden brace, resulting in a fingertip amputation.

An employee was climbing up a ladder to the top of a railcar. The employee slipped and fell from the ladder, striking the coupler of the railcar during the fall. This caused the employee's body to shift, and they landed on their head/nose/face. The employee suffered broken ribs, a broken cheekbone, a broken nose, and internal bleeding.

An employee was climbing up a fixed ladder on a tank car. The employee fell from the ladder to the ground, 8 to 10 feet below, and broke both ankles.

An employee was operating an ironworker (steel punching/shearing) machine. A piece of the tooling broke off and struck the employee's neck; a fragment was lodged in his neck. The employee was hospitalized and required surgery.

On October 25, 2025, an employee was stringing up a new reel of tire tread on a machine. The employee pulled a 6-inch tail and proceeded to spool up the liner. As the machine was jogged to begin the liner wrapping process, the liner caught the employee's glove and pulled their right arm into the liner, causing a fracture to the arm.

An employee was doing a cable change on top of an electric overhead traveling (EOT) crane. They were positioned between the cable drum and the drive shaft. While rotating the cable drum, the employee reached for the new cable that was to be installed. The grease fitting on the drive shaft caught their fall harness and pulled them underneath the drive shaft. The employee was pinned between the drive shaft and two pieces of angle steel, resulting in a fracture to their left hip.

An employee was helping two other employees to push a pallet of tile on a loading dock. He suffered a broken fibula and was hospitalized.

On October 5, 2025, an employee was pulling a pressure washer hose when it it disconnected from the cooker. The employee was struck by jets of high-pressure water, resulting in lacerations to their left thigh requiring surgery. The employee was hospitalized.