JANESVILLE, WISCONSIN—
Alliant Energy
Direct exposure to electricity, greater than 220 volts · Electrocutions, electric shocks
At a glance
Federal OSHA recorded a severe workplace injury at Alliant Energy, 3330 Palmer Drive, JANESVILLE, WISCONSIN 53546 on — Electrocutions, electric shocks, affecting the bODY SYSTEMS.
Watch Alliant Energy — free
Get an email when a new federal OSHA severe-injury report for Alliant Energy is published. One employer, no account, unsubscribe in one click.
Final narrative
An employee was working on an underground transformer when his arm made contact with the conductor and the side of the transformer housing. He sustained an electric shock and slight burns to his right finger and right elbow, requiring hospitalization.
Similar incidents · Same event type
S COFFEYVILLE, OKLAHOMA—
Star Pipe USA LLC
An employee was making modifications to an electrical panel when an arc flash occurred. The employee suffered burns to multiple parts of the body.
MIDLAND, TEXAS—
Star Electric Company of Texas
An employee was installing a ground wire to a power transmission pole. The ground wire contacted an energized portion of a cut-out, causing an arc-flash. The employee was hospitalized with second degree burns to their chest and arms.
CLEARWATER, FLORIDA—
Powertown Line Construction LLC
An employee was connecting a utility transformer for underground service to a home. The employee's impact drill went across two connection bars with 240 volts of potential, creating an arc flash. The employee sustained burns to the face and eyes due to the arc flash and molten aluminum.
WILLARD, OHIO—
Stanley Black and Decker, Inc
On December 15, 2023, at 9:15 AM, an employee was changing 60-amp fuses in a 480-volt panel when an arc flash occurred. The employee was hospitalized with burns to both hands.
KERSEY, COLORADO—
Sun Valley Contractors, LLC
An employee had just turned off breakers and was loosening wires on panels when they were shocked by 480 volts of electricity.
More severe injuries in this industry (NAICS 336112)
EPHRATA, PENNSYLVANIA—
Smeal LTC LLC
An employee was walking on the top deck of a fire truck that was being assembled. The employee lost their balance and stepped on open, horizontally hinged doors, which could not support their weight. The employee fell 6 feet to the concrete floor and suffered fractures to their elbow and pelvis.
WENTZVILLE, MISSOURI—
GENERAL MOTORS
An employee was assessing an overhead stamping press door for alignment issues when the counterbalance moved and their left thumb was caught between the chain and the sprocket. The thumb was amputated. The door was locked out/tagged out at the time but gravitational pull was not controlled.
ELLABELL, GEORGIA—
LCT Tech America, Inc.
An employee was performing a bubble test (pressure test) on a pipeline to locate a leak when the joint elbow that was producing the leak detached and struck him. The employee sustained fractures to a rib and clavicle, as well as injuries to his spleen and lung.
ANNISTON, ALABAMA—
Anniston Army Depot
An employee was installing a combat vehicle turbine engine to a dynamometer stand in a dynamometer test engine cell. While lining up the turbine engine to the stand, the employee's left arm was fractured between the engine and the face of the stand.
KANSAS CITY, MISSOURI—
CHALLENGE MANUFACTURING LLC
An employee was operating a forklift to retrieve a stack of empty containers from behind a weld cell. The forklift grabbed the stack. Then the forks tilted back, causing the top container to fall onto the forklift cage. The employee got off the forklift and went to pull the container down. The container fell on the employee's head and leg, resulting in a bump to the head and a fractured right leg.
More severe injuries in WISCONSIN
MADISON, WISCONSIN—
RG Professional Carpenter, Inc.
The injured employee was assisting five other employees with bracing a wall panel that was being stood up. Another employee slipped on frost on the floor surface. The employees went to evacuate the area in anticipation of the wall panel falling over. The injured employee went to jump through a window opening within the wall panel and their lower half was crushed by the falling wall panel. The employee sustained a fractured pelvis.
FRANKLIN, WISCONSIN—
General Thermodynamics, Inc.
An employee was using a vertical band saw to cut a thick piece of rubber material. While being cut, the material shifted, causing the employee s right hand to contact the moving blade. The employee's thumb was amputated below the knuckle. The employee was hospitalized, undergoing surgery.
SAINT CLOUD, WISCONSIN—
Sargento Foods Inc
A production sanitation employee was pre-rinsing an incline conveyor and noticed cheese stuck between the belt idler. The employee went to remove the cheese and their glove got caught and pulled their left forearm into the conveyor. The employee's arm was fractured. The machine was not locked out/tagged out at the time.
HIXTON, WISCONSIN—
Asher Enterprises, Inc.
An employee was on a ladder, taking measurements for a new gutter installation. The ladder slipped out from under him and both he and the ladder fell to the ground. He was hospitalized with seven broken ribs and a broken clavicle.
VERONA, WISCONSIN—
Consolidated Electrical Distributors Inc.
An employee was unloading a truck for a delivery job. While moving boxes in the truck, the employee tripped over a pallet and fell out of the truck to the ground, resulting in four broken ribs.