Arkansas Electric Cooperative, Inc

An employee was in a bucket truck trimming the upper limbs on a dead tree. They returned to the ground when a large limb at the top of the tree came loose and struck them in the head and shoulder. The employee was hospitalized with a facial laceration and head and spine injuries.

An employee became ill while installing new poles, requiring overnight hospitalization for dehydration/heat exhaustion.

An employee had picked up a piece of steel tubing at each end to throw it into a recycling bin. When the employee threw the tube, it caught on a fixed air pipe. The employee's right hand was caught between the end of the tube and the pipe, and the employee's index finger was broken.

As part of a sidewalk demolition project, the injured employee was loading rocks and concrete by hand into the bucket of a skid steer. A rock thrown by another employee struck the injured employee's left hand, causing a partial amputation of the middle finger.

A temporary employee was picking up a metal bed frame and throwing it in the back of a garbage truck. The bed frame bounced off the truck and struck the left side of the employee's head, resulting in a concussion and a laceration.

An employee was walking on the ground with an inspector when they were struck by a falling temporary guardrail. The employee sustained muscle and ligament tears as well as internal bleeding.

An employee was working as an umpire near second base at a baseball game when they were struck in the head by a baseball thrown from the outfield. The employee sustained a subarachnoid hemorrhage, displaced temporal bone, and nondisplaced fracture of the left zygomatic bone.

An employee was terminating cables in a junction box. A loose ground wire came into contact with the bushing, causing a flash that burned the right side of the employee's face and his right hand.

An employee was using a bucket truck hoist to raise secondary aerial wiring. The wire made contact with the primary wire, causing an arc flash. The employee suffered burns to both hands and was hospitalized.

An employee was working to move a telephone pole when the pole rolled, causing injury to their hip.

An employee was terminating conductors to buss bars inside the secondary compartment of a single-phase transformer. An arc flash occurred, causing burns to the soft tissue of the employee's face.

An employee was securing the claw of a grapple truck to the truck bed. His left little finger was caught between the tie down strap and the rub rail of the truck, resulting in partial amputation of the finger.

An employee was operating an ironworker (steel punching/shearing) machine. A piece of the tooling broke off and struck the employee's neck; a fragment was lodged in his neck. The employee was hospitalized and required surgery.

On October 25, 2025, an employee was stringing up a new reel of tire tread on a machine. The employee pulled a 6-inch tail and proceeded to spool up the liner. As the machine was jogged to begin the liner wrapping process, the liner caught the employee's glove and pulled their right arm into the liner, causing a fracture to the arm.

An employee was doing a cable change on top of an electric overhead traveling (EOT) crane. They were positioned between the cable drum and the drive shaft. While rotating the cable drum, the employee reached for the new cable that was to be installed. The grease fitting on the drive shaft caught their fall harness and pulled them underneath the drive shaft. The employee was pinned between the drive shaft and two pieces of angle steel, resulting in a fracture to their left hip.

An employee was helping two other employees to push a pallet of tile on a loading dock. He suffered a broken fibula and was hospitalized.

On October 5, 2025, an employee was pulling a pressure washer hose when it it disconnected from the cooker. The employee was struck by jets of high-pressure water, resulting in lacerations to their left thigh requiring surgery. The employee was hospitalized.