JONESBORO, ARKANSAS—
Hytrol Conveyor Company, Inc.
Caught in running equipment or machinery, n.e.c. · Amputations
At a glance
Federal OSHA recorded a severe workplace injury at Hytrol Conveyor Company, Inc., 2020 Hytrol Drive, JONESBORO, ARKANSAS 72401 on — Amputations, affecting the finger(s), fingernail(s), n.e.c..
Final narrative
An employee was working on a conveyor that had just been manufactured, testing its speed. A section of the conveyor was missing rollers; this exposed the V-belt and pulley sheave. As the employee measured the belt's speed, his left ring finger was caught between the V-belt and pulley sheave and was amputated.
More severe injuries at Hytrol Conveyor Company, Inc.
JONESBORO, ARKANSAS—
Hytrol Conveyor Company, Inc.
On November 25, 2024, at 9:00 a.m., two employees were moving a metal staging pallet that was located in an automation cell. The injured employee slipped and their left middle finger was crushed between the pallet and metal frame of the machine, resulting in an amputation to the finger padding.
JONESBORO, ARKANSAS—
Hytrol Conveyor Company, Inc.
On October 22, 2024, at approximately 10:15 a.m., an employee was forming a stand leg on a standard brake press. As they were readjusting the part, the tip of their right thumb was caught in the brake press, resulting in a partial amputation. The incident occurred during training.
JONESBORO, ARKANSAS—
Hytrol Conveyor Company, Inc.
An employee was working in the power assembly area where chains are placed onto conveyors. As the employee went to retrieve a guardrail to put on a conveyor, they tripped over a spool of chain on floor and fell, sustaining a left femur fracture.
JONESBORO, ARKANSAS—
Hytrol Conveyor Company, Inc.
An employee was cooling off at a receiving dock after welding. He leaned on the plastic safety chain guarding the door and fell 5 feet 10 inches to the concrete surface below. He suffered a broken right leg and was hospitalized.
JONESBORO, ARKANSAS—
Hytrol Conveyor Company, Inc.
An employee was forming a part on a brake press machine when the employee's finger was pinched between the part and the die, resulting in a right index fingertip amputation and a broken right index finger.
View Hytrol Conveyor Company, Inc.'s full OSHA safety record →
Similar incidents · Same event type
MIDLAND, TEXAS—
Scout Surface Solutions
Employees were assembling and testing a butterfly valve unit and actuator combo. When the unit was function tested with air, the valve gate closed on an employee's left thumb resulting in a fracture and laceration.
CHESTER, ILLINOIS—
Gilster-Mary Lee Corporation
An employee was doing a daily inspection of the sifter screen on a mixer when the mixer line activated. The armature for the screen struck the employee's right wrist. Their wrist was cut and their hand was fractured.
DALLAS, TEXAS—
Maxwell Paper Products Co
An employee was being trained on a machine when a roller came down on their hand, resulting in a fracture and laceration.
CONESTOGA, PENNSYLVANIA—
Turkey Hill LLC
An employee was doing a dry run during the setup of an ice cream machine. The machine indexed and the filler head amputated the employee's left middle finger above the last knuckle.
ERIE, PENNSYLVANIA—
Erie Strayer Company
An employee was on a 3-foot ladder guiding cable onto a spool during installation on an overhead door. As the control box was jogged, the employee's hand was caught between the cable and spool, resulting in a wrist and hand fracture.
More severe injuries in this industry (NAICS 333922)
PANHANDLE, TEXAS—
3S Americas, Inc.
An installation technician for a wind turbine lift was using a chain hoist to move materials up a tower. The chain storage unit overflowed; the chain spilled and fell about 40-50 feet down the tower. It struck the injured employee in the face, causing fractures to their nose and cheekbones.
JONESBORO, ARKANSAS—
Hytrol Conveyor Company, Inc.
On November 25, 2024, at 9:00 a.m., two employees were moving a metal staging pallet that was located in an automation cell. The injured employee slipped and their left middle finger was crushed between the pallet and metal frame of the machine, resulting in an amputation to the finger padding.
JONESBORO, ARKANSAS—
Hytrol Conveyor Company, Inc.
On October 22, 2024, at approximately 10:15 a.m., an employee was forming a stand leg on a standard brake press. As they were readjusting the part, the tip of their right thumb was caught in the brake press, resulting in a partial amputation. The incident occurred during training.
JOHNSTON, RHODE ISLAND—
Dematic Corp
An employee was working on a ladder when he lost his balance and fell onto the conveyor rail, resulting in two broken ribs and hospitalization.
BURLESON, TEXAS—
KWS Manufacturing Company, Ltd.
An employee was cleaning welding debris from a steel part that was in a fixture. The part moved, cut through the employee's cut-resistant glove, and amputated their right middle fingertip.
More severe injuries in ARKANSAS
BLYTHEVILLE, ARKANSAS—
NATIONAL MILL MAINTENANCE, LLC
An employee was operating an ironworker (steel punching/shearing) machine. A piece of the tooling broke off and struck the employee's neck; a fragment was lodged in his neck. The employee was hospitalized and required surgery.
TEXARKANA, ARKANSAS—
The Goodyear Tire & Rubber Company
On October 25, 2025, an employee was stringing up a new reel of tire tread on a machine. The employee pulled a 6-inch tail and proceeded to spool up the liner. As the machine was jogged to begin the liner wrapping process, the liner caught the employee's glove and pulled their right arm into the liner, causing a fracture to the arm.
OSCEOLA, ARKANSAS—
Big River Steel, LLC
An employee was doing a cable change on top of an electric overhead traveling (EOT) crane. They were positioned between the cable drum and the drive shaft. While rotating the cable drum, the employee reached for the new cable that was to be installed. The grease fitting on the drive shaft caught their fall harness and pulled them underneath the drive shaft. The employee was pinned between the drive shaft and two pieces of angle steel, resulting in a fracture to their left hip.
PINE BLUFF, ARKANSAS—
American Tile & Marble Co., Inc
An employee was helping two other employees to push a pallet of tile on a loading dock. He suffered a broken fibula and was hospitalized.
SCRANTON, ARKANSAS—
Johnson Industrial Coatings, LLC.
On October 5, 2025, an employee was pulling a pressure washer hose when it it disconnected from the cooker. The employee was struck by jets of high-pressure water, resulting in lacerations to their left thigh requiring surgery. The employee was hospitalized.