MILWAUKEE, WISCONSIN—
Bardes Plastics, Inc
Caught in running equipment or machinery, n.e.c. · Crushing injuries
At a glance
Federal OSHA recorded a severe workplace injury at Bardes Plastics, Inc, 5225 West Clinton Avenue, MILWAUKEE, WISCONSIN 53223 on — Crushing injuries, affecting the finger(s), fingernail(s), unspecified.
Final narrative
An employee was setting up a thermo-forming press and placing a shim while standing on a step stool. The employee slipped and inadvertently activated the press crushing his left thumb. He was hospitalized for surgery.
Similar incidents · Same event type
MIDLAND, TEXAS—
Scout Surface Solutions
Employees were assembling and testing a butterfly valve unit and actuator combo. When the unit was function tested with air, the valve gate closed on an employee's left thumb resulting in a fracture and laceration.
CHESTER, ILLINOIS—
Gilster-Mary Lee Corporation
An employee was doing a daily inspection of the sifter screen on a mixer when the mixer line activated. The armature for the screen struck the employee's right wrist. Their wrist was cut and their hand was fractured.
DALLAS, TEXAS—
Maxwell Paper Products Co
An employee was being trained on a machine when a roller came down on their hand, resulting in a fracture and laceration.
CONESTOGA, PENNSYLVANIA—
Turkey Hill LLC
An employee was doing a dry run during the setup of an ice cream machine. The machine indexed and the filler head amputated the employee's left middle finger above the last knuckle.
ERIE, PENNSYLVANIA—
Erie Strayer Company
An employee was on a 3-foot ladder guiding cable onto a spool during installation on an overhead door. As the control box was jogged, the employee's hand was caught between the cable and spool, resulting in a wrist and hand fracture.
More severe injuries in this industry (NAICS 326199)
CENTERVILLE, OHIO—
DimcoGray Corporation
An employee was operating a drill and tap machine. He was placing a part with his right hand and removing a part coming in on the left side. He saw a part that was crooked and went to straighten it. The machine clamped down on his left index finger, degloving the top part of the finger and resulting in a partial amputation.
MILLTOWN, WISCONSIN—
Greatmats.com Corporation
An employee was performing maintenance on a roll cutting machine in a warehouse. The employee was removing excess grease from the bearings when the machine's chain caught their right index finger. The fingertip was amputated by the chain and sprocket.
MINERAL WELLS, TEXAS—
Shumard Corporation
During fiberglass work, an employee mixed a methyl ethyl ketone peroxide (MEKP) catalyst with a cobalt chemical that they thought was a dye. A chemical reaction occurred, resulting in an explosion. The employee sustained second-degree burns on his back and a blister on his right arm.
TIFFIN, OHIO—
Toledo Molding & Die, Inc.
An employee was walking when she tripped over a box on the ground and fell. The employee was hospitalized with a severe dislocation to the hip and leg that required surgery.
SPRINGFIELD, NEW JERSEY—
United Window & Door Manufacturing, Inc.
An employee was cutting material on a straight saw when the blade lacerated her right index finger. The employee was hospitalized.
More severe injuries in WISCONSIN
MADISON, WISCONSIN—
RG Professional Carpenter, Inc.
The injured employee was assisting five other employees with bracing a wall panel that was being stood up. Another employee slipped on frost on the floor surface. The employees went to evacuate the area in anticipation of the wall panel falling over. The injured employee went to jump through a window opening within the wall panel and their lower half was crushed by the falling wall panel. The employee sustained a fractured pelvis.
FRANKLIN, WISCONSIN—
General Thermodynamics, Inc.
An employee was using a vertical band saw to cut a thick piece of rubber material. While being cut, the material shifted, causing the employee s right hand to contact the moving blade. The employee's thumb was amputated below the knuckle. The employee was hospitalized, undergoing surgery.
SAINT CLOUD, WISCONSIN—
Sargento Foods Inc
A production sanitation employee was pre-rinsing an incline conveyor and noticed cheese stuck between the belt idler. The employee went to remove the cheese and their glove got caught and pulled their left forearm into the conveyor. The employee's arm was fractured. The machine was not locked out/tagged out at the time.
HIXTON, WISCONSIN—
Asher Enterprises, Inc.
An employee was on a ladder, taking measurements for a new gutter installation. The ladder slipped out from under him and both he and the ladder fell to the ground. He was hospitalized with seven broken ribs and a broken clavicle.
VERONA, WISCONSIN—
Consolidated Electrical Distributors Inc.
An employee was unloading a truck for a delivery job. While moving boxes in the truck, the employee tripped over a pallet and fell out of the truck to the ground, resulting in four broken ribs.