Federal OSHA recorded a severe workplace injury
at Tesla, Inc., Advanced Stores Company, ENFIELD, CONNECTICUT 06082
on — Herniated discs, affecting the back, including spine, spinal cord, unspecified.
Final narrative
On July 2, 2019, an employee had been bending down to take temperature measurements from solar panels. The next morning, he awoke with a pinching sensation and pain. He was hospitalized with a herniated disc.
HospitalizedBack, including spine, spinal cord, unspecifiedBodily motion or position of injured, ill worker
An employee was inspecting a casted part that weighed 330 pounds. The part fell from a lift assist onto the employee, striking his upper right arm and head. He suffered burns to the upper right arm and was hospitalized.
On June 4, 2025, an employee was skimming molten aluminum when it dripped down from the skimming spoon onto the employee's left pant leg, burning the top of their left foot. The employee was hospitalized and required surgery.
An employee was loosening the legs of a metal desk on the production floor to adjust the height when the desk collapsed onto the employee's right hand, resulting in amputation of the thumb tip.
An employee was transferring molten aluminum into a sow (mold). Condensation dripped from a pipe located above the area into the sow as it was staged to fill. When the molten aluminum came into contact with the water, the molten aluminum reacted and was released into the air, contacting the employee. They sustained burns to their chest, neck, and bilateral upper extremities.
An employee was using a ladder to access a roof to install conduit pipes when the ladder slipped on patio tile and came out from under him, causing him to fall approximately 8 feet to the ground. The employee suffered a spinal fracture and brain bruising.
An employee was transporting a patient to their residence. The employee bent down to grab a stretcher and felt a pop in their back. The employee sustained a herniation of their L4-L5 disc.
On November 18, 2023, at approximately 8:30 a.m., an employee was loading products onto a delivery truck. The employee lost footing and sustained a torn hamstring and a hematoma with nerve damage to his foot/leg.
An employee was carrying a pipe when it slipped from their hand. As they reached to grab it while it was falling, they felt a muscle pull. The employee was hospitalized for an abdominal hernia.
On August 21, 2023, an employee was reaching for product on the shelf in the cooler when their back gave out. The employee was hospitalized for an exacerbation of bulging disks.
An employee was using a battery-powered torque tool to fasten a bolt. The tool was activated and the socket of the tool rotated and pulled in their gloved left hand. The employee sustained a left index fingertip amputation.
An employee was inspecting a casted part that weighed 330 pounds. The part fell from a lift assist onto the employee, striking his upper right arm and head. He suffered burns to the upper right arm and was hospitalized.
On June 4, 2025, an employee was skimming molten aluminum when it dripped down from the skimming spoon onto the employee's left pant leg, burning the top of their left foot. The employee was hospitalized and required surgery.
On June 3, 2025, the injured employee was setting a mold with a co-worker when the mold was displaced and caught their right hand against the stop block. The employee sustained a fracture and partial amputation of their middle finger.
An employee was checking on a machine outside of the building and removed a cover to clean out a blocked area. His hand was caught by a rotary valve in a dust collection machine. The employee's fingertip was amputated.
An employee was working to clean a glue roller with a scraper tool. The tool and the employee's left thumb were pinched between two rollers, resulting in a partial amputation.
An employee was re-arranging boxes of pipe insulation on a pallet. One of the boxes fell from the pallet and knocked over an upright empty cylinder. The cylinder fell and crushed the tip of the employee's right toe. The employee's toe required surgical amputation.
An employee was securing the claw of a grapple truck to the truck bed. His left little finger was caught between the tie down strap and the rub rail of the truck, resulting in partial amputation of the finger.
An employee was cutting extruded aluminum framing material using a horizontal band saw. She went to grab a rag in the machine when the rag contacted the blade and pulled her hand in toward the blade, resulting in a partial amputation of the right index finger.