KANSAS CITY, KANSAS—
General Motors
Caught in running equipment or machinery during regular operation · Amputations
At a glance
Federal OSHA recorded a severe workplace injury at General Motors, 3201 Fairfax Trafficway, KANSAS CITY, KANSAS 66115 on — Amputations, affecting the fingertip(s).
Final narrative
Two employees were working on a tooling cross bar section. One employee had his right hand on top of a pneumatically controlled front tilt head. The tilt head actuated and pinched the tip of his right ring finger resulting in amputation of the fingertip.
More severe injuries at General Motors
WENTZVILLE, MISSOURI—
General Motors
An employee was moving a tool box when its top drawer started to open. While the employee was stabilizing the tool box and drawers, their left middle and ring fingertips were amputated through the nailbeds. The fingertips were surgically reattached.
WENTZVILLE, MISSOURI—
GENERAL MOTORS
An employee was assessing an overhead stamping press door for alignment issues when the counterbalance moved and their left thumb was caught between the chain and the sprocket. The thumb was amputated. The door was locked out/tagged out at the time but gravitational pull was not controlled.
ARLINGTON, TEXAS—
General Motors
An employee dropped off an empty dolly train and moved his tugger over to a full material train that was waiting. He was then walking around the material train to validate it, and was struck by a forward-moving forklift. The forklift tire rolled over the employee's right foot/toes, fracturing four toes. The employee was hospitalized.
WENTZVILLE, MISSOURI—
GENERAL MOTORS
An employee was conducting assembly line activities on the front driver's side of a van when she tripped and fell backward to the floor, landing on her back. The employee sustained a compression fracture to a vertebra.
ARLINGTON, TEXAS—
General Motors
An employee was driving a forklift when it struck a structural steel column, which separated the mast from the forklift. The right side of the employee's skull struck a front support post in the forklift cabin, and the employee suffered a neck fracture and a concussion.
View General Motors's full OSHA safety record →
Similar incidents · Same event type
DELAND, FLORIDA—
Pall Corporation
An employee was operating a machine when a wire pulled his right glove resulting in amputation of the index and middle fingertips.
FAIRFIELD, OHIO—
Koch Foods of Cincinnati
An employee was grinding chicken when their right index fingertip was caught in the grinder and amputated.
BAY MINETTE, ALABAMA—
Stella-Jones Corporation
An employee was sharpening peeler blades when their shirt was caught in the grinding wheel. The employee sustained tendon damage and a crushed right hand.
THEODORE, ALABAMA—
Mack Manufacturing, Inc.
An employee was passing through a large metal door when the door closed on the employee, resulting in a cracked rib.
THOMPSON, CONNECTICUT—
Nutmeg Container Corporation
An employee was preparing to cut lumber on a panel saw when the clamp engaged and caught the employee's left middle finger, resulting in a fingertip amputation.
More severe injuries in this industry (NAICS 336111)
AUSTIN, TEXAS—
Tesla Giga Factory
An employee was using a battery-powered torque tool to fasten a bolt. The tool was activated and the socket of the tool rotated and pulled in their gloved left hand. The employee sustained a left index fingertip amputation.
AUSTIN, TEXAS—
Tesla, Inc.
An employee was inspecting a casted part that weighed 330 pounds. The part fell from a lift assist onto the employee, striking his upper right arm and head. He suffered burns to the upper right arm and was hospitalized.
THE COLONY, TEXAS—
Tesla Distribution Center
An employee was reaching to hook her harness into a lanyard and began to experience abdominal pain. The employee sustained an umbilical hernia.
AUSTIN, TEXAS—
Tesla, Inc.
On June 4, 2025, an employee was skimming molten aluminum when it dripped down from the skimming spoon onto the employee's left pant leg, burning the top of their left foot. The employee was hospitalized and required surgery.
SANDUSKY, OHIO—
Ventra Sandusky LLC
On June 3, 2025, the injured employee was setting a mold with a co-worker when the mold was displaced and caught their right hand against the stop block. The employee sustained a fracture and partial amputation of their middle finger.
More severe injuries in KANSAS
WATHENA, KANSAS—
Omya Inc.
An employee was working to remove a product blockage from a piece of equipment. The employee was struck by a metal bar near the deck of the pin mixer equipment and sustained blunt force trauma to the torso.
COFFEYVILLE, KANSAS—
John Deere Coffeyville Works
An employee was moving a rack onto a lower conveyor in the south heat treat area when their finger got caught between the part tray and the rollers, resulting in a fingertip fracture and amputation.
HAVEN, KANSAS—
Haven Steel Products Inc
An employee was climbing a ladder to get on top of the breakroom. The ladder slipped, causing him to fall to the ground. The employee sustained fractures to his upper back, left foot, and ankle.
MINNEOLA, KANSAS—
Vestas-American Wind Tech
Two employees were removing a circuit breaker. The injured employee was using wrenches in the removal process. One of the wrenches contacted an adjacent door, resulting in an arc flash. The employee suffered burns to their neck, face, and ear, as well as momentary vision loss due to the flash.
MEADE, KANSAS—
Alliance Ag and Grain LLC
An employee bent over to pick up a rubber mat from the ground. When he grabbed the corner of the mat, a rattlesnake hidden under it bit his left middle finger near the first knuckle. He was hospitalized.