Marel Inc.

An employee was changing a saw blade when the saw machine activated. The employee's left ring and little fingers were amputated.

An employee was clearing a jam from the label cutting machine when their left middle finger was partially amputated.

Two employees were repairing the hydraulic engagement pins on a rented front-end wheel loader. The machine controls were activated to move the attachment pins and an employee's finger was caught between the pins and the bushings. Their right index finger was partially amputated.

An employee was cleaning the conveyor on a piece of equipment when they slipped and their right hand was pulled into the chain sprocket. The employee's fifth fingertip was amputated.

An employee was throwing blankets onto a blanket folding and stacking machine. A blanket got stuck in the machine and she attempted to remove it when the machine contacted her right little finger, resulting in a fingertip amputation.

An employee was using a powered pallet jack. As he was maneuvering backward, his right foot slipped, causing the pallet jack to pin his right leg against a rack. He suffered a laceration between his ankle and his calf, as well as a fracture, and was hospitalized.

An employee was operating a high-density polyethylene (HDPE) fusion machine. The machine's carriage was directing a fitting that was being lifted from the machine when the employee's left ring finger was crushed in a pinch point, resulting in a fingertip amputation.

An employee was struck by a semi truck and pinned against a forklift while performing unloading activities. The employee was hospitalized with broken ribs and a torn left MCL.

An employee was on top of a railcar and was using a rod to push out some resin that had become lodged inside of the car. When he lifted the rod, it contacted a live, overhead wire and he was electrocuted. The employee sustained burns to 12-20 percent of their body.

An employee used a forklift to take a trash hopper to the dumpster. While driving back from the dumpster, the cord that had been used to open the hopper handle got caught under a wheel of the forklift causing the cord to tighten around the employee's left hand. The employee sustained amputation to the index, middle, and ring fingers.

An employee was working to remove a product blockage from a piece of equipment. The employee was struck by a metal bar near the deck of the pin mixer equipment and sustained blunt force trauma to the torso.

An employee was moving a rack onto a lower conveyor in the south heat treat area when their finger got caught between the part tray and the rollers, resulting in a fingertip fracture and amputation.

An employee was climbing a ladder to get on top of the breakroom. The ladder slipped, causing him to fall to the ground. The employee sustained fractures to his upper back, left foot, and ankle.

Two employees were removing a circuit breaker. The injured employee was using wrenches in the removal process. One of the wrenches contacted an adjacent door, resulting in an arc flash. The employee suffered burns to their neck, face, and ear, as well as momentary vision loss due to the flash.

An employee bent over to pick up a rubber mat from the ground. When he grabbed the corner of the mat, a rattlesnake hidden under it bit his left middle finger near the first knuckle. He was hospitalized.