J. R. Butler Inc

An employee was loading materials while standing on a flatbed trailer. The employee stepped backwards off the flatbed trailer and fell 4 feet to the ground, sustaining bruising and possible spine damage.

During moving activities, three employees unsecured and then lost control of the end piece of a gantry crane. The piece rolled out from under them and struck the injured employee's foot, amputating his right big toe and requiring hospitalization.

An employee was operating a sit-down type of material handling equipment (MHE). They were turning the MHE with the clamp attachment in the air when the MHE fell over onto its right side. The employee's right foot was caught under the battery cover of the MHE. The employee sustained a chemical burn from the battery and a fractured right ankle.

An employee was driving a snowmobile when it flipped over. The employee suffered a broken rib.

An employee was driving an unloaded forklift outside a building. During a left turn, the forklift drove off the paved area onto an unpaved surface, became unstable, and tipped over. The employee was pinned under the forklift and suffered two broken leg bones and a broken hip.

An employee was riding in a utility task vehicle when it overturned. The employee sustained a broken leg.

An employee was trimming tree branches from an aerial lift. As they were maneuvering the aerial bucket lift from inside, the truck drove over soft ground and tipped over. The bucket lift fell to the ground with the employee tied off inside, resulting in rib fractures.

An employee was using a metal shear when it amputated the tip of his right index finger.

An employee was spotting a suspended forklift load and went to rotate the load when they were struck by the left tire of the forklift, resulting in a broken foot and lower leg.

An employee was unloading glass panels from a delivery truck and riding the lift gate down with a cart of the panels. The material shifted when the lift gate reached the ground and the glass panels fell onto his right foot. The employee sustained three fractures to his foot.

On March 26, 2025, an employee was operating a forklift. They were passing a stationary skid steer when their left foot contacted the skid steer, resulting in a crushed left ankle. The employee was hospitalized and required surgery.

An employee was using a table saw to cut a splicer piece when the metal kicked back and the employee's finger contacted the saw blade. The employee sustained a finger amputation.

An employee was delivering materials. He was doing his pre-delivery inspection on the roof of the jobsite (a warehouse) when he fell through a plexiglass skylight. He landed on his feet on the concrete floor 14 feet below. The employee sustained fractures to his spine, left ulnar/radius, and right heel. The employee required surgery.

An employee was cutting cabinet trim using a table saw when four fingers on his left hand were severed, resulting in hospitalization and amputation.

An employee was removing packaging from a roll of printing substrate. The blade of their utility knife got stuck. The employee used both hands to free the knife and the blade partially amputated their left little fingertip.

A concrete batch plant operator was assisting with clearing spoil piles using a skid steer. The skid steer backed into a stationary screen plant. The employee's left little finger was crushed between the controls of the skid steer and the screen plant, resulting in a fracture and laceration. The employee's finger was surgically amputated.

An employee was standing on an extension ladder, using a torquing tool to remove bolts that secured blades to a rotor. When the torquing tool activated, its reaction arm came around and pinched the employee's right middle finger against a lifting eye. His fingertip was amputated.