Wheatland Tube Company

An employee was cleaning slag off the platform and slipped off a ledge. Their foot fell into a molten zinc pot resulting in burns to the leg and foot.

An employee was using a crane. The hook slipped and a fitting fell onto a finger on the employee's left hand causing a fracture and laceration.

An employee was transporting an 800-pound die on a cart from the tool room. The employee was pulling the cart when it struck a metal plate on the floor. This caused the cart to tip forward and the die to slide off the cart. The die struck the employee's left foot and their second toe was amputated.

An employee was using a forklift to load pallets of product on a trailer. He exited the forklift to adjust a pallet by hand. The pallet fell on him, resulting in an injury to the left leg.

An employee was lifting a 500-pound steel counterweight off a pallet using a magnetic hold jib crane. The counterweight detached from the crane and the employee sustained a left foot/toe fracture that required surgery.

An employee was using a pipe wrench to turn a 42-foot-long steel pipe on jack stands to weld the bottom portion. The pipe fell off the stands, striking the injured employee on his left shin. The employee sustained a left leg fracture at the shin area as well as a tibia fracture that required surgery.

An employee was working to reposition a spacer located between pinch roll mounting blocks on a slitter machine. He was standing to the side of the control panel with one hand on the control switch. While reaching for the spacer with his other hand, the control panel was inadvertently pressed and the pinch rolls closed, causing his left index finger to get caught between the upper and lower mounting blocks. The employee sustained an amputation to the fingertip.

An employee was sanding a conduit pipe inside a CNC lathe. The employee's left hand and arm became entangled in the running clamp of the machine and the employee sustained a broken left forearm.

An employee was unjamming a piece on a shape pultrusion line. Once the piece was trimmed back, an employee realigned the second puller on the line so that the cured piece could pass through the second puller. When the cycle was engaged, the machine amputated the tip of the employee's right thumb.

An employee was operating a hoist to lift material. His left index finger became pinched between a D-ring (lifting device) and the material being lifted, resulting in an amputation of the fingertip.

An employee was setting up a cable loop machine and training employees on the set-up procedures. As the employee loaded product, the clamp closed on their left hand and amputated their index finger. The employee had surgery.

An employee fell while moving a water canister, resulting in fractures to four fingers on her right hand.

An employee was changing a die in a press when the die slipped and crushed the employee's left index finger. The employee sustained an open facture of the tuft of the left distal phalanx and a partial amputation.

An employee was mixing sauce using a sauce barrel mixer when his left little finger was amputated.

An employee was driving a boom lift (in the lowered position) in an exterior dock area. The lift s left wheels rolled onto base plates that covered a 3-foot-deep sump pit. The base plates failed, and one side of the lift dropped. The employee's left leg was caught under the lift basket, and he suffered a fracture to the lower leg including the ankle.

A temporary employee was carrying a nail gun through the warehouse when it hit his leg, activated, and fired a nail into the leg.