DODGE CITY, KANSAS—
CARGILL MEAT SOLUTIONS
Compressed or pinched by shifting objects or equipment · Amputations
At a glance
Federal OSHA recorded a severe workplace injury at CARGILL MEAT SOLUTIONS, 3201 E. TRAIL STREET, DODGE CITY, KANSAS 67801 on — Amputations, affecting the fingertip(s).
Final narrative
An employee was replacing a spindle using a hoist when the spindle slipped approximately 3 to 4 inches, pinching the employee's fingertip between the spindle and a fixed object (separator base). As a result, the employee's fingertip was partially amputated.
More severe injuries at CARGILL MEAT SOLUTIONS
FORT MORGAN, COLORADO—
Cargill Meat Solutions
An employee was in the basement when he observed animal blood dripping from a small hole in the auger trough. The employee went to plug the hole with a small piece of fat. As the employee pushed the fat into the hole, the auger flight caught his fingertip, resulting in amputation between the nailbed and first knuckle.
DODGE CITY, KANSAS—
Cargill Meat Solutions
An employee was operating a band saw and sustained a partial amputation to their right index fingertip.
FRIONA, TEXAS—
Cargill Meat Solutions
An employee was removing scraps of meat from underneath a barrel dumper when she was struck by the barrel dumper, resulting in pelvic fractures.
MARSHALL, MISSOURI—
CARGILL MEAT SOLUTIONS
An employee was pushing a piece table when it struck a machine. The employee's finger was pinched and partially amputated between the table and machine.
HAZLETON, PENNSYLVANIA—
Cargill Meat Solutions
An employee was driving a forklift when it collided with another forklift. The employee's middle finger was pinched between the two forklifts and partially amputated.
View CARGILL MEAT SOLUTIONS's full OSHA safety record →
Similar incidents · Same event type
MECHANICSBURG, PENNSYLVANIA—
TForce Freight
An employee was operating a forklift and unloading a truck. After the truck was unloaded, the employee got off the forklift and proceeded to adjust the dock plate with a hook tool. The dock plate slipped and the employee went to adjust the plate with their hand when their left middle finger got caught. Their finger was amputated above the first joint.
DELAWARE CITY, DELAWARE—
Liveo Research, Inc.
An employee was rotating a carbide granulator blade when his finger was caught between the blade and a stationary part of the machine. The employee's right middle finger was partially amputated and they suffered an avulsion to the right ring fingertip.
FORT WORTH, TEXAS—
Best Pump and Flow
An employee was using a CNC metal lathe machine in manual mode to check that the thread blocking tool made contact with the jaws. As the employee was manually spinning the spindle, his index fingertip was crushed between the spindle's jaws and the grooving insert, resulting in a fingertip amputation.
BUFFALO, NEW YORK—
FORD MOTOR COMPANY
During a material handling operation, an employee's fingertip was caught under an air conditioning unit as the unit was lowered onto a cart. The employee's fingertip was amputated.
UNADILLA, GEORGIA—
Lasseter Tractor Company. Inc.
An employee was removing a bolt from a tractor hub when their right index finger was caught between the hub and the frame. The employee's fingertip was crushed and the employee was hospitalized.
More severe injuries in this industry (NAICS 311612)
EAST BERNARD, TEXAS—
T G Meat Center LLC
After cutting a slab of beef short ribs, an employee turned to grab the pieces he had cut and his right hand contacted the saw blade. The employee sustained an amputation to his right index finger.
MANITOWOC, WISCONSIN—
Lakeside Foods
An employee was using a de-clipping machine to cut the metal clips off of sausage sticks. As the employee put a link of sausages into the machine, their hand slipped into the point of operation. A piston pinched the employee's left index finger, causing a partial amputation.
ST CHARLES, ILLINOIS—
Smithfield Packaged Meats Corporation
An employee was operating a small tabletop grinder in a food safety quality assurance lab. She was stuffing meat down the grinder's chute when the grinder caught her right hand. Its auger caused an amputation to her middle finger and a partial amputation to her index finger.
SHEBOYGAN FALLS, WISCONSIN—
Johnsonville, LLC
An employee was cleaning a part on a pedestal grinder. The employee's middle finger contacted the abrasive wheel, resulting in a partial amputation.
FORT MORGAN, COLORADO—
Cargill, Incorporated
A maintenance employee was removing an inspection plate from an industrial cooker. Hot liquid spilled onto him and burned his hands, arms, and torso area. He was hospitalized.
More severe injuries in KANSAS
WATHENA, KANSAS—
Omya Inc.
An employee was working to remove a product blockage from a piece of equipment. The employee was struck by a metal bar near the deck of the pin mixer equipment and sustained blunt force trauma to the torso.
COFFEYVILLE, KANSAS—
John Deere Coffeyville Works
An employee was moving a rack onto a lower conveyor in the south heat treat area when their finger got caught between the part tray and the rollers, resulting in a fingertip fracture and amputation.
HAVEN, KANSAS—
Haven Steel Products Inc
An employee was climbing a ladder to get on top of the breakroom. The ladder slipped, causing him to fall to the ground. The employee sustained fractures to his upper back, left foot, and ankle.
MINNEOLA, KANSAS—
Vestas-American Wind Tech
Two employees were removing a circuit breaker. The injured employee was using wrenches in the removal process. One of the wrenches contacted an adjacent door, resulting in an arc flash. The employee suffered burns to their neck, face, and ear, as well as momentary vision loss due to the flash.
MEADE, KANSAS—
Alliance Ag and Grain LLC
An employee bent over to pick up a rubber mat from the ground. When he grabbed the corner of the mat, a rattlesnake hidden under it bit his left middle finger near the first knuckle. He was hospitalized.