Honeywell International, Inc.

An employee was disconnecting a uranium hexafluoride line from a tank that had been filled. Prior to securing the manifold cap, a co-worker was manipulating a valve on another cylinder fill spot, resulting in back-pressure and uranium hexafluoride wisping through the unsecured manifold cap. The employee inhaled the chemical and was hospitalized.

An employee had been moving materials in the production building when they began showing signs of heat stress. The employee was hospitalized for hyponatremia and hypophosphatemia.

An employee was performing preventative maintenance on a V-belt conveyor drive motor. The motor chain pulled the employee's rag and right hand into the chain and sprocket, resulting in an amputation.

An employee was carrying a case of water in a box with ice while walking down the stairs. The employee missed a step and fell down the stairs, sustaining a concussion.

An employee was driving a front-load/bucket tractor on an unpaved roadway. While surveying conditions, the employee stopped the tractor and positioned the front load bucket to approximately 18 inches above the ground to take pictures/video of a water-filled ravine that crossed the main roadway. The employee was then driving forward when the front wheels rolled down a slight sloped wash. The bucket embedded in the dirt, causing the tractor to stop. The employee's abdomen was injured from the abrupt stop and the pressure from the seatbelt he was wearing.

An employee was changing mud cups in the hopper cylinders of a concrete pump truck. The cylinders moved and three of the employees fingers were amputated.

An employee was standing on the rig floor next to a polishing unit. His hand was placed on the polishing unit when the pump was lowered, resulting in amputation of their right thumb, ring, and middle fingertips.

An employee was using air to blow out the air wash to the blender and grinder station. As the employee reached to verify that the air wash was clean, the unit pinched and amputated their fingertip.

An employee was retrieving a lost drill pipe with a lifting bail when their left thumb got pinched between the table and handle of the lifting bail while trying to re-thread the pipe to lift it out. The employee suffered an amputation to the left thumb.

An employee was removing a core chuck from a stationary roll when their right ring finger was pinched between the chuck and the roll. The employee's fingertip was amputated.

An employee turned a corner while walking, tripped over the corner of a pallet on the floor, fell onto her arm, and broke it. She was hospitalized, requiring surgery.

An employee was moving a transformer from inside a shop. He was rolling it down a ramp when it tipped over onto his right foot and big toe, resulting in crush injuries and a laceration.

Employees were moving an electrical cabinet by using two wheeled equipment skates. One of the wheels of the skates became caught in a crack in the floor, causing the equipment to tip over and land on an employee's right foot. The employee's foot was fractured.

An employee was using an industrial magnet to lift and maneuver a weldment. While the frame was being set down on the welding table, the magnet disengaged prematurely; the frame fell and crushed the employee's left ring and middle fingers. The employee underwent medical amputations to the middle finger (at the first knuckle) and the ring finger (just past the second knuckle).

An employee was working on an order when they were struck by a forklift. This caused the employee to bump into a machine. The employee suffered a laceration to the right thigh, requiring hospitalization.

An employee fell while moving a water canister, resulting in fractures to four fingers on her right hand.

An employee was changing a die in a press when the die slipped and crushed the employee's left index finger. The employee sustained an open facture of the tuft of the left distal phalanx and a partial amputation.

An employee was mixing sauce using a sauce barrel mixer when his left little finger was amputated.

An employee was driving a boom lift (in the lowered position) in an exterior dock area. The lift s left wheels rolled onto base plates that covered a 3-foot-deep sump pit. The base plates failed, and one side of the lift dropped. The employee's left leg was caught under the lift basket, and he suffered a fracture to the lower leg including the ankle.

A temporary employee was carrying a nail gun through the warehouse when it hit his leg, activated, and fired a nail into the leg.