Struck by object or equipment, n.e.c. · Bruises, contusions
At a glance
Federal OSHA recorded a severe workplace injury
at EBTEC Corporation, 68 Prospect hill road, EAST WINDSOR, CONNECTICUT 06088
on — Bruises, contusions, affecting the multiple trunk locations.
Final narrative
A part being machined with a CNC machine hit a door on the machine where an employee was working. The door in turn hit the employee, bruising the employee's torso.
HospitalizedMultiple trunk locationsMetal, woodworking, and special material machinery, unspecified
An employee was inspecting a bridge repair project. A gas-powered, walk-behind pavement saw, being used 12 feet away from the employee lunged forward, cutting his left foot. The employee's fourth toe was amputated and he was hospitalized.
An employee had been reviewing an insulated glass unit. The employee was placing the glass unit back in its box when it slipped out of the box and a chipped corner lacerated the employee's left hand.
An employee was on a truck while using a clamp to secure a quartz slab to an A-frame on the truck. A gust of wind pushed the slab onto the employee, resulting in a dislocated right shoulder and wrist.
An employee was shearing off two inches of metal when the metal kicked up and struck his hand. The employee's left ring and middle fingertips were amputated.
An employee was working on a 35,000-pound I.D. fan. As the employee rotated the blades with his foot, the blades continued to spin, lacerating his right foot and amputating a toe.
More severe injuries in this industry (NAICS 333992)
An employee was moving metal out of a cart. He had removed one piece and was working to move another when the metal shifted. His right ring finger was crushed between the two pieces, and he suffered a partial amputation to the finger pad at the tip.
An employee was at the loading dock working to manually move an oversized load off of a pallet that was sitting on another pallet. The oversized load (a gas cylinder cradle) tipped over and crushed the employee's right leg against the ground. The employee sustained a fracture to their ankle/leg requiring surgery.
An employee was depressurizing a line stop actuator when their left arm was struck by a threaded, 2-inch nipple from the side of the line stop housing. The employee sustained fractures to their left arm and a rib.
An employee was cutting the top of an empty scrap barrel that previously contained antifreeze. The bottom of the barrel blew out due to pressure that built up and caused his jeans to catch fire, resulting in burns.
An employee was moving extra wire out of a cleaning tank by using the tank's jogging function. Two of the employee's right-hand fingers were caught on the last strand going around the acid roll, and the employee suffered an amputation to the right little fingertip.
An employee was checking on a machine outside of the building and removed a cover to clean out a blocked area. His hand was caught by a rotary valve in a dust collection machine. The employee's fingertip was amputated.
An employee was working to clean a glue roller with a scraper tool. The tool and the employee's left thumb were pinched between two rollers, resulting in a partial amputation.
An employee was re-arranging boxes of pipe insulation on a pallet. One of the boxes fell from the pallet and knocked over an upright empty cylinder. The cylinder fell and crushed the tip of the employee's right toe. The employee's toe required surgical amputation.
An employee was securing the claw of a grapple truck to the truck bed. His left little finger was caught between the tie down strap and the rub rail of the truck, resulting in partial amputation of the finger.
An employee was cutting extruded aluminum framing material using a horizontal band saw. She went to grab a rag in the machine when the rag contacted the blade and pulled her hand in toward the blade, resulting in a partial amputation of the right index finger.