Compressed or pinched by shifting objects or equipment · Amputations
At a glance
Federal OSHA recorded a severe workplace injury
at FORD MOTOR COMPANY, 3663 Lake Shore Road, BUFFALO, NEW YORK 14219
on — Amputations, affecting the finger(s), fingernail(s), n.e.c..
Final narrative
An employee was installing a hydraulic cylinder onto a forklift using an overhead crane. While manually maneuvering the cylinder into place, the employee s left thumb was pinched between the cylinder and the forklift carriage resulting an amputation up to the first knuckle.
AmputationFinger(s), fingernail(s), n.e.c.Vehicle and mobile equipment parts, n.e.c.
An employee was backing an electric industrial carrier into a dolly when their fingers were caught between the vehicle and the bar on the line resulting in amputation of the fingertips on their right middle and ring fingers.
A forklift struck an overhead fan and some racking. The fan fell onto an employee working on the dock, who suffered lacerations and ruptures to the spleen and liver. The employee was hospitalized.
An employee was working with an electric socket gun while training another employee. The trigger on the socket gun was activated and the employee's glove became caught, resulting in an amputation of the right index finger below the knuckle.
During a material handling operation, an employee's fingertip was caught under an air conditioning unit as the unit was lowered onto a cart. The employee's fingertip was amputated.
An employee was walking to her workstation when she tripped on a wheel that was sticking out from a cart. The employee fell onto an ergonomic mat on the floor, landing on her knees. The employee sustained a non-displaced fracture of the left tibia and a non-displaced fracture of the right fibula.
An employee was operating a forklift and unloading a truck. After the truck was unloaded, the employee got off the forklift and proceeded to adjust the dock plate with a hook tool. The dock plate slipped and the employee went to adjust the plate with their hand when their left middle finger got caught. Their finger was amputated above the first joint.
An employee was rotating a carbide granulator blade when his finger was caught between the blade and a stationary part of the machine. The employee's right middle finger was partially amputated and they suffered an avulsion to the right ring fingertip.
An employee was using a CNC metal lathe machine in manual mode to check that the thread blocking tool made contact with the jaws. As the employee was manually spinning the spindle, his index fingertip was crushed between the spindle's jaws and the grooving insert, resulting in a fingertip amputation.
During a material handling operation, an employee's fingertip was caught under an air conditioning unit as the unit was lowered onto a cart. The employee's fingertip was amputated.
An employee was removing a bolt from a tractor hub when their right index finger was caught between the hub and the frame. The employee's fingertip was crushed and the employee was hospitalized.
More severe injuries in this industry (NAICS 336370)
An employee was verifying light curtain function at a load cell tester when their right index finger was amputated by a hydraulic cylinder above the middle knuckle.
An employee was positioning an overhead crane to stand up a skidded coil when the coil swung back. The employee was caught between the swinging coil and another coil sitting on a coil pad, resulting in hospitalization due to a loss of consciousness and a pelvic injury.
An employee was performing general cleanup duties when they collapsed and passed out due to heat exhaustion. They were hospitalized for heat exhaustion, dehydration, and acute renal failure.
A temporary employee was helping a forklift operator by holding metal sheets to steady them as they were placed on a rail for feeding to a stamp machine. The operator lowered the forks with the blanks (weighting approximately 750 pounds). The temporary employee's right index finger was caught between the metal and the feeding rail. The finger was crushed and partially amputated through the bone.
An employee was using a mechanical trim press to trim flash off metal parts. The employee was loading a part to be trimmed when the press cycled and crushed the index fingers on both of their hands. The employee sustained a fingertip amputation. The machine was not guarded at the time.
An employee was operating a battery-powered broom to clean demolition debris off the top of the outermost bridge girder. The girder was approximately 11 feet above the demolition scaffold below. The employee fell approximately 8 feet to wind bracing below. The employee was hospitalized with a pelvis/tailbone fracture. Fall protection was in place at the time.
An employee slipped while descending in a stairwell, fell, and suffered multiple contusions/bruises to the head, neck, shoulders, knees, and back. She was hospitalized.
An employee was directing trucks as they entered and left a highway work zone. A vehicle struck them, resulting in multiple fractures and other injuries. The employee was hospitalized.