Contact with hot objects or substances · Third or fourth degree heat (thermal) burns
At a glance
Federal OSHA recorded a severe workplace injury
at BJ's Restaurant & Brewhouse, 1690 28th St, BOULDER, COLORADO 80301
on — Third or fourth degree heat (thermal) burns, affecting the multiple lower extremities locations, n.e.c..
Final narrative
An employee was on the ledge of a piece of fryer equipment, changing the vent filters above the hood. Her right foot slipped into the hot oil, and she suffered third-degree burns to the calf, ankle, and foot.
An employee was using a two-step ladder and turned to face the opposite direction to look at items on an upper shelf. As he descended, he slipped off the ladder and fell to the floor. The employee sustained a broken right hip.
An employee was discarding fryer oil into a bin by the dumpsters when oil spilled onto him, burning his right ear, face, chest, back, left arm, and left leg.
An employee was standing on a step stool and attempting to grab an empty pot from on top of an oven when the step stool collapsed and slipped out from under her feet. As she was falling to the ground, her left hand grabbed a pot of boiling water from a stove below, spilling the contents on her body. She suffered third degree burns to her stomach, chest, left arm, elbow, and left hand.
An employee connected a steam line to a hose to clean equipment when the fitting broke loose. They were struck by steam in the left inner thigh, resulting in burns that required hospitalization.
An employee was making tea when she noticed tea grinds were collecting on the side and water was no longer dripping through the funnel. The employee was checking the funnel when boiling water and tea grinds spilled onto the left side of her body. The employee sustained burns to her neck, back, and arm.
An employee had turned off the ball valve on a waterpipe system and was removing the plug when the coupling system attached to the strainer came apart. Hot water sprayed on his arm and back, resulting in first- and second-degree burns that required surgery.
An employee was using a shovel to remove waste vermiculite from molten zinc. The metal had been placed in a bin and partially hardened. The employee broke through the partially hardened metal; still-molten metal flowed to the employee's steel-toed right boot and entered through the cloth boot tongue. The employee suffered a third-degree burn to the right foot and was hospitalized.
More severe injuries in this industry (NAICS 722511)
An employee pulled out a bucket of hot oil from under the fryer. The employee then stood on the table to clean the back wall. He stepped down into the bucket of hot oil, resulting in third-degree burns to his left leg.
An employee was walking through the retail store when they tripped over a display rack and fell. The employee was hospitalized with fractures to their left shoulder, left elbow, and left wrist.
An employee was on a roof servicing a refrigeration system. They were using a ladder to get off the roof when they fell, resulting in a shattered left heel that required hospitalization and surgery.
An employee was delivering materials. He was doing his pre-delivery inspection on the roof of the jobsite (a warehouse) when he fell through a plexiglass skylight. He landed on his feet on the concrete floor 14 feet below. The employee sustained fractures to his spine, left ulnar/radius, and right heel. The employee required surgery.
An employee was removing packaging from a roll of printing substrate. The blade of their utility knife got stuck. The employee used both hands to free the knife and the blade partially amputated their left little fingertip.
A concrete batch plant operator was assisting with clearing spoil piles using a skid steer. The skid steer backed into a stationary screen plant. The employee's left little finger was crushed between the controls of the skid steer and the screen plant, resulting in a fracture and laceration. The employee's finger was surgically amputated.
An employee was standing on an extension ladder, using a torquing tool to remove bolts that secured blades to a rotor. When the torquing tool activated, its reaction arm came around and pinched the employee's right middle finger against a lifting eye. His fingertip was amputated.