Compressed or pinched by shifting objects or equipment · Amputations
At a glance
Federal OSHA recorded a severe workplace injury
at Irby Construction Company, 2329 Cortez Road West, BRADENTON, FLORIDA 34207
on — Amputations, affecting the fingertip(s).
Final narrative
An employee was clearing debris from the pin hole while setting up an auger into a shaft. The shaft and auger then fell into place and pinched his right middle finger. The employee suffered a fingertip amputation, just above the nailbed.
AmputationFingertip(s)Machine and appliance parts, unspecified
An employee was servicing a utility line from the bucket of a bucket truck when the bucket contacted the cut-out switch at the top of the pole, resulting in an arc flash. The employee sustained flash burns on his face.
An employee was standing on the back of a boom truck helping the crew position a steel tower with a rope. As the employee was using the rope to guide the tower, the rope broke, causing them to lose balance and fall to the ground. The employee sustained a pelvic fracture and was hospitalized.
An employee was removing a shackle from the rigging holding a caisson that a digger was lowering onto a forklift. The caisson shifted and pinched the employee's fingers against the forklift. His right ring finger was amputated.
An employee was pressing a core on a power line conductor wire when the core gave way, causing the hoist to strike the employee's jaw. The employee sustained a laceration and was hospitalized.
An employee was operating a forklift and unloading a truck. After the truck was unloaded, the employee got off the forklift and proceeded to adjust the dock plate with a hook tool. The dock plate slipped and the employee went to adjust the plate with their hand when their left middle finger got caught. Their finger was amputated above the first joint.
An employee was rotating a carbide granulator blade when his finger was caught between the blade and a stationary part of the machine. The employee's right middle finger was partially amputated and they suffered an avulsion to the right ring fingertip.
An employee was using a CNC metal lathe machine in manual mode to check that the thread blocking tool made contact with the jaws. As the employee was manually spinning the spindle, his index fingertip was crushed between the spindle's jaws and the grooving insert, resulting in a fingertip amputation.
During a material handling operation, an employee's fingertip was caught under an air conditioning unit as the unit was lowered onto a cart. The employee's fingertip was amputated.
An employee was removing a bolt from a tractor hub when their right index finger was caught between the hub and the frame. The employee's fingertip was crushed and the employee was hospitalized.
More severe injuries in this industry (NAICS 237130)
An employee was terminating cables in a junction box. A loose ground wire came into contact with the bushing, causing a flash that burned the right side of the employee's face and his right hand.
An employee was using a bucket truck hoist to raise secondary aerial wiring. The wire made contact with the primary wire, causing an arc flash. The employee suffered burns to both hands and was hospitalized.
An employee was terminating conductors to buss bars inside the secondary compartment of a single-phase transformer. An arc flash occurred, causing burns to the soft tissue of the employee's face.
An employee was securing the claw of a grapple truck to the truck bed. His left little finger was caught between the tie down strap and the rub rail of the truck, resulting in partial amputation of the finger.
An employee was helping a coworker transport a tall palm tree with a mini skid steer. The employee was severely shocked by a high-voltage electrical wire above the ground.
An employee was retrieving a Christmas tree from a shelf using a ladder. He missed a step and fell to the concrete floor. He sustained injury to his head and wrist.
An employee was operating an agricultural tractor during sugarcane harvesting. The employee sustained a lumbar sprain due to vibration or motion from the tractor.
An employee was moving a 3-ton condensing unit, strapped down on a dolly, out of a garage. The strap broke, causing the employee to fall backward onto the brick pavered driveway. The employee suffered injury to a spinal ligament in the neck.