LINCOLN, NEBRASKA—
Neenah Foundry, Inc.
Struck by object falling from vehicle or machinery-other than vehicle part · Crushing injuries
At a glance
Federal OSHA recorded a severe workplace injury at Neenah Foundry, Inc., 5945 N 70th Street, LINCOLN, NEBRASKA 68507 on — Crushing injuries, affecting the hand(s), unspecified.
Final narrative
An employee was flipping a grate on a manual grinding line. As he was placing the grate on the table to lay it down, the grate came off the hook, fell, and crushed the employee's right hand.
More severe injuries at Neenah Foundry, Inc.
LINCOLN, NEBRASKA—
Neenah Foundry, Inc.
A foundry employee was using a hoist to move cast iron parts. He was overcome by the heat and was hospitalized, suffering from heat exhaustion.
LINCOLN, NEBRASKA—
Neenah Foundry, Inc.
An employee was being trained by a second employee on how to cut a metal frame on a lathe. As they set the metal frame down on the lathe, the first employee's right thumb was caught and crushed between the frame and the lathe chuck.
LINCOLN, NEBRASKA—
Neenah Foundry, Inc.
An employee was using a hoist to lift a 300-pound part from a roller conveyor. The part swung as it was being lifted, striking the employee in the right leg, just above the knee. The employee suffered a fractured leg, requiring surgery and an overnight hospitalization.
View Neenah Foundry, Inc.'s full OSHA safety record →
Similar incidents · Same event type
HOUSTON, TEXAS—
Star Pipe Products LTD
An employee was using a crane. The hook slipped and a fitting fell onto a finger on the employee's left hand causing a fracture and laceration.
HOLLY SPRINGS, MISSISSIPPI—
KP Building Products, Inc.
An employee was transporting an 800-pound die on a cart from the tool room. The employee was pulling the cart when it struck a metal plate on the floor. This caused the cart to tip forward and the die to slide off the cart. The die struck the employee's left foot and their second toe was amputated.
BURLINGTON, NEW JERSEY—
BJ'S WHOLESALE CLUB, INC.
An employee was using a forklift to load pallets of product on a trailer. He exited the forklift to adjust a pallet by hand. The pallet fell on him, resulting in an injury to the left leg.
YOUNGSTOWN, OHIO—
International Steel and Counterweights LLC
An employee was lifting a 500-pound steel counterweight off a pallet using a magnetic hold jib crane. The counterweight detached from the crane and the employee sustained a left foot/toe fracture that required surgery.
KILLEEN, TEXAS—
Seneca Mechanical, LLC
An employee was using a pipe wrench to turn a 42-foot-long steel pipe on jack stands to weld the bottom portion. The pipe fell off the stands, striking the injured employee on his left shin. The employee sustained a left leg fracture at the shin area as well as a tibia fracture that required surgery.
More severe injuries in this industry (NAICS 331511)
BENTON, PENNSYLVANIA—
Benton Foundry, Inc.
An employee was realigning two halves of a core box on a core-making machine. Pneumatic pressure released, causing the core box to close on the employee's right thumb. The thumb tip was amputated between the nail and the knuckle.
BIRMINGHAM, ALABAMA—
American Cast Iron Pipe Company
An employee was performing maintenance/electrical work inside a substation, and used a ladder to access the top of a panel box. The employee fell 8-9 feet from the top of the panel box to the ground. The employee was hospitalized with fractures to their ribs and a shoulder injury.
BLYTHEVILLE, ARKANSAS—
NIBCO INC.
An employee's hand was caught in a pinch point in the area of a conveyor for a flask running out of a foundry molding machine. The employee's ring finger was crushed and partially amputated at the base.
PRYOR, OKLAHOMA—
American Castings, LLC
An employee noticed a block was out of place under the weighted mold frame. The employee used another block to push the block out and replace it. When the block came out, the frame came down on his right ring and little fingers. The employee sustained a fracture and partial amputation to the ring fingertip.
JACKSON, OHIO—
OSCO Industries Inc.
An employee was using a fork truck to move a tub containing molten iron that had been drained from the cupula. The tub tipped over and the molten metal came in contact with water. This caused the molten iron to splash back and burn the employee's upper torso.
More severe injuries in NEBRASKA
NEBRASKA CITY, NEBRASKA—
Concrete Industries Nebraska City
An employee was stacking concrete blocks for a concrete bunker. As a block was swinging into place, the employee's left leg was pinched between two blocks, resulting in injuries to his left heel and lower leg.
OMAHA, NEBRASKA—
Elkhorn Mechanical and Combustion
An employee was climbing a ladder to inspect a vent in a restaurant dining area. The ladder slid out on the floor and the employee fell approximately 12 feet onto the ladder and the floor. He was hospitalized with a dislocated shoulder and a back injury.
LINCOLN, NEBRASKA—
4 Seasons Property Services, Inc.
An employee was rappelling down a tree. When he was most of the way down, he fell on the ground and suffered a broken pelvis.
KEARNEY, NEBRASKA—
Cellar Crew LLC
An employee was filtering a fryer with a fryer filter machine. After going around the corner and then returning to the fryers, the employee stepped into the filter machine. The hot oil burned the employee's right ankle, and the employee was hospitalized.
ELGIN, NEBRASKA—
BANB Farms Inc.
An employee was cleaning out corn from a grain bin. The sweep auger in the bin was activated and caught his trouser leg. His leg was pulled into the auger, which injured his calf and caused leg fractures and lacerations.