Other fall to lower level 16 to 20 feet · Fractures
At a glance
Federal OSHA recorded a severe workplace injury
at Perfection Masonry, Inc., 1744 N. Andover Rd., ANDOVER, KANSAS 67002
on — Fractures, affecting the thigh(s).
Final narrative
While working on the top level of scaffolding an employee tripped and fell through the side guard rails to the concrete ground approximately 18 feet below. The employee was hospitalized with a broken left femur and a cut above the left eye.
An employee was transitioning from a ladder onto a roof when the ladder slipped and they fell approximately 20 feet to the ground. The employee was hospitalized with fractures to their pelvis and heel.
An employee was climbing a ladder to bring material onto a roof. The ladder slid and the employee fell 16 feet to the ground, resulting in a broken knee.
An employee was performing an inspection of a bridge crane while working from a 19-foot scissor lift. The employee was going to use a pendant to move the crane to access a different portion of the crane for visual inspection. The scissor lift guard rails were below the girder of the crane to avoid contact. The tow arm for the crane collectors contacted the guardrail of the scissor lift and caused it to tip over. The employee stayed inside the scissor lift basket as he fell to the floor. The employee sustained fractures to the right arm and hip.
An employee was on a forklift that was elevated approximately 20 feet and was auditing inventory. The forklift malfunctioned and the employee fell down to the surface below, causing them to sustain multiple fractures.
More severe injuries in this industry (NAICS 238140)
An employee was changing the spacing on a telehandler's forks. A fork slipped, and the employee's left index finger was caught between it and the mast. The fingertip was medically amputated at the first knuckle.
A maintenance employee was 6 feet up an 8-foot ladder to hand someone a bucket when he lost his balance and fell backward to the tile floor. The employee was hospitalized with a laceration to the back of his head that required staples, a concussion, and three fractured neck vertebrae.
An employee was sitting on the tailgate of a moving pickup truck while holding the handles of a wheelbarrow. The employee fell off the tailgate and struck his head on the asphalt. The employee was hospitalized with a fractured skull and a brain bleed.
An employee was working to remove a product blockage from a piece of equipment. The employee was struck by a metal bar near the deck of the pin mixer equipment and sustained blunt force trauma to the torso.
An employee was moving a rack onto a lower conveyor in the south heat treat area when their finger got caught between the part tray and the rollers, resulting in a fingertip fracture and amputation.
An employee was climbing a ladder to get on top of the breakroom. The ladder slipped, causing him to fall to the ground. The employee sustained fractures to his upper back, left foot, and ankle.
Two employees were removing a circuit breaker. The injured employee was using wrenches in the removal process. One of the wrenches contacted an adjacent door, resulting in an arc flash. The employee suffered burns to their neck, face, and ear, as well as momentary vision loss due to the flash.
An employee bent over to pick up a rubber mat from the ground. When he grabbed the corner of the mat, a rattlesnake hidden under it bit his left middle finger near the first knuckle. He was hospitalized.