JERSEY SHORE, PENNSYLVANIA—
Jersey Shore Steel Company
Caught in running equipment or machinery, n.e.c. · Amputations
At a glance
Federal OSHA recorded a severe workplace injury at Jersey Shore Steel Company, 70 Maryland Avenue, JERSEY SHORE, PENNSYLVANIA 17740 on — Amputations, affecting the forearm(s).
Final narrative
An employee was setting up a mill when his right arm was crushed between the mill rollers. The arm was medically amputated at the elbow.
More severe injuries at Jersey Shore Steel Company
JERSEY SHORE, PENNSYLVANIA—
Jersey Shore Steel Company
An employee was installing v-belts on a set of rolls on a rolling table that was isolated at the time. The employee was using a pipe wrench to manually turn the rolls so that the v-belt could be installed when his left finger became caught in the nip point of the belt and pulley, resulting in a fingertip amputation.
JERSEY SHORE, PENNSYLVANIA—
Jersey Shore Steel Company
An employee was bundling in the finishing department. The employee was fixing a twisted piece of product in the stacker. While trying to reorient the metal, the employees right middle finger was pinched in the stacker resulting in a partial amputation. The machine was running at the time.
View Jersey Shore Steel Company's full OSHA safety record →
Similar incidents · Same event type
MIDLAND, TEXAS—
Scout Surface Solutions
Employees were assembling and testing a butterfly valve unit and actuator combo. When the unit was function tested with air, the valve gate closed on an employee's left thumb resulting in a fracture and laceration.
CHESTER, ILLINOIS—
Gilster-Mary Lee Corporation
An employee was doing a daily inspection of the sifter screen on a mixer when the mixer line activated. The armature for the screen struck the employee's right wrist. Their wrist was cut and their hand was fractured.
DALLAS, TEXAS—
Maxwell Paper Products Co
An employee was being trained on a machine when a roller came down on their hand, resulting in a fracture and laceration.
CONESTOGA, PENNSYLVANIA—
Turkey Hill LLC
An employee was doing a dry run during the setup of an ice cream machine. The machine indexed and the filler head amputated the employee's left middle finger above the last knuckle.
ERIE, PENNSYLVANIA—
Erie Strayer Company
An employee was on a 3-foot ladder guiding cable onto a spool during installation on an overhead door. As the control box was jogged, the employee's hand was caught between the cable and spool, resulting in a wrist and hand fracture.
More severe injuries in this industry (NAICS 331111)
NORTH JACKSON, OHIO—
Universal Stainless & Alloy Products Inc.
An employee used a crane to set down a bar. The bar measured 9 inches by 16 feet. The strap got stuck under the bar, and the employee asked another employee to jog the roll. The bar rolled and pinched the injured employee's left hand, resulting in a fingertip amputation.
MOUNT PLEASANT, TEXAS—
Priefert Manufacturing
An employee was loading a steel forming machine with steel to be processed. He went to move a cooling hose out of the way and his left thumb was crushed by the forming roller, resulting in injuries that required surgical amputation.
PUEBLO, COLORADO—
CF&I Steel L.P.
An employee was advancing a rail to line up for welding with a secondary rail on the weld line when his right middle and ring fingers were caught between the rails. The employee sustained an amputation to the top knuckle of the middle finger and a fracture to the ring finger. The machine was guarded at the time.
BRADDOCK, PENNSYLVANIA—
United States Steel Corporation
An employee was working near molten metal and experienced heat illness symptoms including cramps. The employee was hospitalized.
TAMPA, FLORIDA—
Tampa Bay Steel, LLC
An employee was preparing bundles of 24-foot square metal tubing to be loaded onto a truck and cut the safety band for a bundle. While the employee was removing a piece of dunnage from a bundle, they bumped the bundle with their leg. The metal tubing then fell forward and struck the employee, causing a fractured left ankle.
More severe injuries in PENNSYLVANIA
WYNNEWOOD, PENNSYLVANIA—
Main Line Clinical Labs
An employee was closing a door when the door closed on their right index finger, resulting in a fingertip amputation.
POCONO SUMMIT, PENNSYLVANIA—
Ardent Mills
An employee was walking into the motor control center (MCC) room when his right ring finger was caught in the hinge of a doorway. He sustained an open phalanx fracture, which resulted in a partial amputation above the first knuckle.
LANCASTER, PENNSYLVANIA—
Zimmerman & Herr
An employee was changing the spacing on a telehandler's forks. A fork slipped, and the employee's left index finger was caught between it and the mast. The fingertip was medically amputated at the first knuckle.
EBENSBURG, PENNSYLVANIA—
McAneny Brothers, Inc.
An employee was pulling down a broken skid with a forklift. When the employee backed up the forklift to get the forks out of the skid he pulled down, he contacted the forks of another parked forklift, fracturing both of his legs. He was hospitalized.
PITTSBURGH, PENNSYLVANIA—
Metz Culinary Management LLC
An employee was carrying cups back to the kitchen when her foot got caught on a cart and she fell face-first. During the fall, a piece of glass from a cup cut the inside of her mouth, severing an artery. She also sustained a laceration on her lower lip. The employee was hospitalized.