BAE Systems Land & Armaments Limited Partnership

An employee was changing a bearing on an auger. He stepped down on the auger, which was still moving, and his foot was caught between the auger and the wall, amputating his right pinky toe. The auger was not locked/tagged out at the time.

An employee was assisting with pipe on a drilling rig. The slips came down and landed on the employee's left foot fracturing four metatarsals.

Two employees were struck by the rotary table of a drilling rig while installing caisson. Employee 1 suffered multiple fractures, internal injuries, and head trauma. Employee 2 suffered multiple fractures, internal injuries, spinal injury, and head trauma.

Employees were felling hazard trees. The injured employee was conducting 'bucking' operations to saw a tree from the road when the tree kicked-back, pinning him against the ground and fracturing his left femur. The employee was hospitalized and required surgery.

An employee was greasing tongs on a work-over rig. The tongs lacerated one of the employee's fingers.

An employee was chaining a vehicle when he had to change tools and the compressor. As the compressor was being charged, the employee stepped near the vehicle to make sure the compressor was attached. Then, he instructed a co-worker to lower the compressor. His right hand was on the compressor and under the chain, causing his ring finger to be crushed.

On May 4, 2025, at approximately 11:00 AM, an employee was using a table saw to cut notches in a piece of wood when the equipment kicked back, contacting their left index finger. The employee sustained an amputation of the fingertip.

On November 7, 2024, at about 12:30 PM, an employee was moving a cannon on a gantry crane when the straps holding the cannon broke and it fell. The employee was hospitalized with a crushed pelvis, multiple fractures, and other severe injuries.

An employee in the welding training booth was working to back gouge a weld on a 5mm plate. While grinding, the gouger high-centered and walked over the plate striking and severely lacerating the employee's left thumb.

An employee was walking when his foot caught residual adhesive from floor tape and he tripped and fell to the concrete floor, resulting in a fractured right hip.

An employee was adjusting a switch on the loading cradle for a metal tracer lathe. The machine cycled, resulting in an amputation to the left index fingertip.

An employee was moving a tensile strength test device with a dolly. The device fell from the dolly onto the employee's right leg, causing a compound fracture.

An employee was walking past a crossover conveyor when a ramp came down and hit them in the back. The employee sustained a broken back vertebra, as well as a concussion, and was hospitalized.

An employee was using a hook tool to pull a pallet onto the lift gate of a tractor trailer. The hook detached from the underside of the pallet, causing the employee to fall backward off the lift gate. The employee landed on the concrete parking lot about 5 feet below, suffering fractures to the skull and two thoracic vertebrae.

A skid loader backed over an employee's leg, breaking it.

An employee was walking on a truss table when he lost his balance and fell approximately 3 feet to the floor. The employee sustained a dislocated and fractured left ankle.