105,313Records 71,083Employers 85,290Hospitalizations 27,770Amputations 2015-01-01 2025-10-31
Safety Incidents OSHA Severe Injury Reports · 2015–2025

Trienda Holdings, L.L.C.

Struck against moving part of machinery or equipment · Amputations

Federal OSHA recorded a severe workplace injury at Trienda Holdings, L.L.C., N 7660 INDUSTRIAL ROAD, PORTAGE, WISCONSIN 53901 on — Amputations, affecting the finger(s), fingernail(s), n.e.c..

On December 13, 2020, a press operator was making adjustments to the direction of a fan to cool the frames on the thermoforming press. The employee's left middle finger contacted the moving fan blades resulting in amputation to the first digit.

Amputation Finger(s), fingernail(s), n.e.c. Extruding, injecting, forming, molding machinery, n.e.c.

Trienda Holdings, L.L.C.

An employee was banding a completed skid of plastic sheets on a 13-inch-tall, 8-foot x 8-foot platform. The employee fell from the platform to the concrete floor and suffered a broken left hip.

Trienda Holdings, L.L.C.

Two employees were removing a broken drive chain that weighted approximately 70 lbs. from a sprocket on a bottom plate motor. The injured employee's hand slipped from the oil on the chain and their right thumb was pinched between the chain and sprocket causing a partial thumb amputation.

Trienda Holdings, L.L.C.

An employee unscrewed a platen collar during set-up. The vibration of the thermoformer caused the platen to shift and fall on the employee's finger, amputating the tip (without bone loss).

Trienda Holdings, L.L.C.

While transferring a plastic sheet onto a pallet, an employee fell 7 feet into a grinder pit due to an unfastened floor plate. The employee suffered three broken ribs, a punctured lung, and a broken scapula.

TriEnda Holdings, L.L.C.

An employee was retrieving a plastic part from inside a cooling tunnel when her finger became caught in a conveyor nip point, amputating her right middle fingertip.

View Trienda Holdings, L.L.C.'s full OSHA safety record →

Leidy's LLC

An employee was operating a band saw when his right little fingertip was amputated.

Swift Beef Company

An employee was operating a strip saw. As the employee shut off the saw, their right index and middle fingertips were amputated by the blade before it came to a complete stop.

Kitchen Tune-Up

An employee was using a table saw to cut a piece of wood for wall framing. The wood jumped, causing the employee's hand to move toward the saw, amputating their left index finger and causing a laceration on their hand.

BBCJ LUMBER LLC

An employee was operating a trim saw. While trying to free a jammed board she had just cut, she came into contact with the running saw blade, which amputated her right thumb.

Appalachian Wood Floors, Inc.

An employee was using a shaper to cut wood when their right hand contacted the blade, resulting in a partial amputation to the right ring finger.

DimcoGray Corporation

An employee was operating a drill and tap machine. He was placing a part with his right hand and removing a part coming in on the left side. He saw a part that was crooked and went to straighten it. The machine clamped down on his left index finger, degloving the top part of the finger and resulting in a partial amputation.

Greatmats.com Corporation

An employee was performing maintenance on a roll cutting machine in a warehouse. The employee was removing excess grease from the bearings when the machine's chain caught their right index finger. The fingertip was amputated by the chain and sprocket.

Shumard Corporation

During fiberglass work, an employee mixed a methyl ethyl ketone peroxide (MEKP) catalyst with a cobalt chemical that they thought was a dye. A chemical reaction occurred, resulting in an explosion. The employee sustained second-degree burns on his back and a blister on his right arm.

Toledo Molding & Die, Inc.

An employee was walking when she tripped over a box on the ground and fell. The employee was hospitalized with a severe dislocation to the hip and leg that required surgery.

United Window & Door Manufacturing, Inc.

An employee was cutting material on a straight saw when the blade lacerated her right index finger. The employee was hospitalized.

RG Professional Carpenter, Inc.

The injured employee was assisting five other employees with bracing a wall panel that was being stood up. Another employee slipped on frost on the floor surface. The employees went to evacuate the area in anticipation of the wall panel falling over. The injured employee went to jump through a window opening within the wall panel and their lower half was crushed by the falling wall panel. The employee sustained a fractured pelvis.

General Thermodynamics, Inc.

An employee was using a vertical band saw to cut a thick piece of rubber material. While being cut, the material shifted, causing the employee s right hand to contact the moving blade. The employee's thumb was amputated below the knuckle. The employee was hospitalized, undergoing surgery.

Sargento Foods Inc

A production sanitation employee was pre-rinsing an incline conveyor and noticed cheese stuck between the belt idler. The employee went to remove the cheese and their glove got caught and pulled their left forearm into the conveyor. The employee's arm was fractured. The machine was not locked out/tagged out at the time.

Asher Enterprises, Inc.

An employee was on a ladder, taking measurements for a new gutter installation. The ladder slipped out from under him and both he and the ladder fell to the ground. He was hospitalized with seven broken ribs and a broken clavicle.

Consolidated Electrical Distributors Inc.

An employee was unloading a truck for a delivery job. While moving boxes in the truck, the employee tripped over a pallet and fell out of the truck to the ground, resulting in four broken ribs.