PORTAGE, WISCONSIN—
Trienda Holdings, L.L.C.
Compressed or pinched by shifting objects or equipment · Amputations
At a glance
Federal OSHA recorded a severe workplace injury at Trienda Holdings, L.L.C., N7660 Industrial Road, PORTAGE, WISCONSIN 53901 on — Amputations, affecting the finger(s), fingernail(s), unspecified.
Final narrative
Two employees were removing a broken drive chain that weighted approximately 70 lbs. from a sprocket on a bottom plate motor. The injured employee's hand slipped from the oil on the chain and their right thumb was pinched between the chain and sprocket causing a partial thumb amputation.
More severe injuries at Trienda Holdings, L.L.C.
PORTAGE, WISCONSIN—
Trienda Holdings, L.L.C.
An employee was banding a completed skid of plastic sheets on a 13-inch-tall, 8-foot x 8-foot platform. The employee fell from the platform to the concrete floor and suffered a broken left hip.
PORTAGE, WISCONSIN—
Trienda Holdings, L.L.C.
On December 13, 2020, a press operator was making adjustments to the direction of a fan to cool the frames on the thermoforming press. The employee's left middle finger contacted the moving fan blades resulting in amputation to the first digit.
PORTAGE, WISCONSIN—
Trienda Holdings, L.L.C.
An employee unscrewed a platen collar during set-up. The vibration of the thermoformer caused the platen to shift and fall on the employee's finger, amputating the tip (without bone loss).
PORTAGE, WISCONSIN—
Trienda Holdings, L.L.C.
While transferring a plastic sheet onto a pallet, an employee fell 7 feet into a grinder pit due to an unfastened floor plate. The employee suffered three broken ribs, a punctured lung, and a broken scapula.
PORTAGE, WISCONSIN—
TriEnda Holdings, L.L.C.
An employee was retrieving a plastic part from inside a cooling tunnel when her finger became caught in a conveyor nip point, amputating her right middle fingertip.
View Trienda Holdings, L.L.C.'s full OSHA safety record →
Similar incidents · Same event type
MECHANICSBURG, PENNSYLVANIA—
TForce Freight
An employee was operating a forklift and unloading a truck. After the truck was unloaded, the employee got off the forklift and proceeded to adjust the dock plate with a hook tool. The dock plate slipped and the employee went to adjust the plate with their hand when their left middle finger got caught. Their finger was amputated above the first joint.
DELAWARE CITY, DELAWARE—
Liveo Research, Inc.
An employee was rotating a carbide granulator blade when his finger was caught between the blade and a stationary part of the machine. The employee's right middle finger was partially amputated and they suffered an avulsion to the right ring fingertip.
FORT WORTH, TEXAS—
Best Pump and Flow
An employee was using a CNC metal lathe machine in manual mode to check that the thread blocking tool made contact with the jaws. As the employee was manually spinning the spindle, his index fingertip was crushed between the spindle's jaws and the grooving insert, resulting in a fingertip amputation.
BUFFALO, NEW YORK—
FORD MOTOR COMPANY
During a material handling operation, an employee's fingertip was caught under an air conditioning unit as the unit was lowered onto a cart. The employee's fingertip was amputated.
UNADILLA, GEORGIA—
Lasseter Tractor Company. Inc.
An employee was removing a bolt from a tractor hub when their right index finger was caught between the hub and the frame. The employee's fingertip was crushed and the employee was hospitalized.
More severe injuries in this industry (NAICS 326199)
CENTERVILLE, OHIO—
DimcoGray Corporation
An employee was operating a drill and tap machine. He was placing a part with his right hand and removing a part coming in on the left side. He saw a part that was crooked and went to straighten it. The machine clamped down on his left index finger, degloving the top part of the finger and resulting in a partial amputation.
MILLTOWN, WISCONSIN—
Greatmats.com Corporation
An employee was performing maintenance on a roll cutting machine in a warehouse. The employee was removing excess grease from the bearings when the machine's chain caught their right index finger. The fingertip was amputated by the chain and sprocket.
MINERAL WELLS, TEXAS—
Shumard Corporation
During fiberglass work, an employee mixed a methyl ethyl ketone peroxide (MEKP) catalyst with a cobalt chemical that they thought was a dye. A chemical reaction occurred, resulting in an explosion. The employee sustained second-degree burns on his back and a blister on his right arm.
TIFFIN, OHIO—
Toledo Molding & Die, Inc.
An employee was walking when she tripped over a box on the ground and fell. The employee was hospitalized with a severe dislocation to the hip and leg that required surgery.
SPRINGFIELD, NEW JERSEY—
United Window & Door Manufacturing, Inc.
An employee was cutting material on a straight saw when the blade lacerated her right index finger. The employee was hospitalized.
More severe injuries in WISCONSIN
MADISON, WISCONSIN—
RG Professional Carpenter, Inc.
The injured employee was assisting five other employees with bracing a wall panel that was being stood up. Another employee slipped on frost on the floor surface. The employees went to evacuate the area in anticipation of the wall panel falling over. The injured employee went to jump through a window opening within the wall panel and their lower half was crushed by the falling wall panel. The employee sustained a fractured pelvis.
FRANKLIN, WISCONSIN—
General Thermodynamics, Inc.
An employee was using a vertical band saw to cut a thick piece of rubber material. While being cut, the material shifted, causing the employee s right hand to contact the moving blade. The employee's thumb was amputated below the knuckle. The employee was hospitalized, undergoing surgery.
SAINT CLOUD, WISCONSIN—
Sargento Foods Inc
A production sanitation employee was pre-rinsing an incline conveyor and noticed cheese stuck between the belt idler. The employee went to remove the cheese and their glove got caught and pulled their left forearm into the conveyor. The employee's arm was fractured. The machine was not locked out/tagged out at the time.
HIXTON, WISCONSIN—
Asher Enterprises, Inc.
An employee was on a ladder, taking measurements for a new gutter installation. The ladder slipped out from under him and both he and the ladder fell to the ground. He was hospitalized with seven broken ribs and a broken clavicle.
VERONA, WISCONSIN—
Consolidated Electrical Distributors Inc.
An employee was unloading a truck for a delivery job. While moving boxes in the truck, the employee tripped over a pallet and fell out of the truck to the ground, resulting in four broken ribs.