FADDIS CONCRETE PRODUCTS

An employee was attempting to close a bay door when it struck them in the back of the head and neck before coming to rest on their right leg. The employee suffered lumbar fractures and a displaced ankle fracture.

An employee and a co-worker were preparing to remove a load of mesh from a flatbed. After releasing the ratchet strap that was being used to secure the mesh, the tension on the strap caused the mesh to shift and fall toward the employee. The employee was pushed into a panel behind him, resulting in a fractured left index finger, C5 and C7 spinal fractures, and possible nerve damage.

A temporary employee utilized an overhead crane to move a concrete panel from one area to another. The panel started moving towards a post. The employee put his hand on the concrete panel to stop it before hitting the post, but his left hand was caught between the panel and the post. The employee sustained a crushing injury to the left hand and was hospitalized for surgery.

Three concrete panels were placed on dunnage, approximately 6" off the ground in the batch end area of the plant. The dunnage was perpendicular to the panels and approximately 3 feet from each end of the panel. These panels were spaced about 3 to 4 feet apart and were free standing on the dunnage. At 6:40 p.m., an employee was picking up foam pieces in the same area and placing them into a 5-gallon bucket. He bent down to pick up an item about midway down the panel when the second panel from the bay door started to tip as the employee stood up. The panel came down and hit the employee about waist level (front side) and pushed him back into the third panel (closest to bay door). Both panels fell towards the south end of the building and the second panel ended up on top of the employee's right leg. The dunnage acted as a buffer to keep his leg from being fully crushed. He was hospitalized with a broken right tibia and torn right knee ligaments.

An employee was standing on a conveyor (approximately 2 feet to 3 feet above the ground) to cut and dismantle it when the conveyor collapsed. The employee fell and hit the ground/steel conveyor frame, suffering a fractured hip and wrist.

An employee was operating a machine when a wire pulled his right glove resulting in amputation of the index and middle fingertips.

An employee was grinding chicken when their right index fingertip was caught in the grinder and amputated.

An employee was sharpening peeler blades when their shirt was caught in the grinding wheel. The employee sustained tendon damage and a crushed right hand.

An employee was passing through a large metal door when the door closed on the employee, resulting in a cracked rib.

An employee was preparing to cut lumber on a panel saw when the clamp engaged and caught the employee's left middle finger, resulting in a fingertip amputation.

An employee was stacking concrete blocks for a concrete bunker. As a block was swinging into place, the employee's left leg was pinched between two blocks, resulting in injuries to his left heel and lower leg.

An employee was patching precast concrete. He fell from a concrete wall support to the ground due to wind. He was hospitalized with fractures to his left ankle and right knee.

An employee was opening a precast concrete form and rolled his ankle. The employee required surgery on his ankle.

A driver slipped and fell to the ground while exiting his truck. He sustained a lacerated spleen.

An employee was cutting wood on a table saw when the wood got jammed. While clearing the jam, the wood moved forward and his left index and middle fingertips were amputated.

An employee was closing a door when the door closed on their right index finger, resulting in a fingertip amputation.

An employee was walking into the motor control center (MCC) room when his right ring finger was caught in the hinge of a doorway. He sustained an open phalanx fracture, which resulted in a partial amputation above the first knuckle.

An employee was changing the spacing on a telehandler's forks. A fork slipped, and the employee's left index finger was caught between it and the mast. The fingertip was medically amputated at the first knuckle.

An employee was pulling down a broken skid with a forklift. When the employee backed up the forklift to get the forks out of the skid he pulled down, he contacted the forks of another parked forklift, fracturing both of his legs. He was hospitalized.

An employee was carrying cups back to the kitchen when her foot got caught on a cart and she fell face-first. During the fall, a piece of glass from a cup cut the inside of her mouth, severing an artery. She also sustained a laceration on her lower lip. The employee was hospitalized.