Struck against moving part of machinery or equipment · Cuts, lacerations
At a glance
Federal OSHA recorded a severe workplace injury
at Charter Dura-Bar, 1800 W. Lake Shore Drive, WOODSTOCK, ILLINOIS 60098
on — Cuts, lacerations, affecting the finger(s), fingernail(s), unspecified.
Watch Charter Dura-Bar — freeGet an email when a new federal OSHA severe-injury report for Charter Dura-Bar is published. One employer, no account, unsubscribe in one click.
Final narrative
An employee was cutting iron bar samples with a horizontal band saw when the saw made contact with the employee's right middle finger, resulting in a laceration.
An employee was running a line of cast iron bar when liquid iron spilled onto the employee's feet, resulting in burns to the bottom of the left foot and heel.
An employee was repairing a bushing on a fixture stand in a repair area, using a portable drill tool with a deburring attachment. The tool started to jump around, and the employee's left gloved hand made contact with the deburring attachment. The employee suffered a laceration to the top of the hand and an amputation of the tip of the little finger.
An employee was operating a strip saw. As the employee shut off the saw, their right index and middle fingertips were amputated by the blade before it came to a complete stop.
An employee was using a table saw to cut a piece of wood for wall framing. The wood jumped, causing the employee's hand to move toward the saw, amputating their left index finger and causing a laceration on their hand.
An employee was operating a trim saw. While trying to free a jammed board she had just cut, she came into contact with the running saw blade, which amputated her right thumb.
An employee was realigning two halves of a core box on a core-making machine. Pneumatic pressure released, causing the core box to close on the employee's right thumb. The thumb tip was amputated between the nail and the knuckle.
An employee was performing maintenance/electrical work inside a substation, and used a ladder to access the top of a panel box. The employee fell 8-9 feet from the top of the panel box to the ground. The employee was hospitalized with fractures to their ribs and a shoulder injury.
An employee's hand was caught in a pinch point in the area of a conveyor for a flask running out of a foundry molding machine. The employee's ring finger was crushed and partially amputated at the base.
An employee noticed a block was out of place under the weighted mold frame. The employee used another block to push the block out and replace it. When the block came out, the frame came down on his right ring and little fingers. The employee sustained a fracture and partial amputation to the ring fingertip.
An employee was using a fork truck to move a tub containing molten iron that had been drained from the cupula. The tub tipped over and the molten metal came in contact with water. This caused the molten iron to splash back and burn the employee's upper torso.
An employee was changing a die in a press when the die slipped and crushed the employee's left index finger. The employee sustained an open facture of the tuft of the left distal phalanx and a partial amputation.
An employee was driving a boom lift (in the lowered position) in an exterior dock area. The lift s left wheels rolled onto base plates that covered a 3-foot-deep sump pit. The base plates failed, and one side of the lift dropped. The employee's left leg was caught under the lift basket, and he suffered a fracture to the lower leg including the ankle.