CNH Industrial America LLC

Two employees were loading an 81-pound part onto a press brake. The injured employee felt a sharp pain in their abdomen as they were lifting it. The employee was hospitalized with a hernia that required surgery.

An employee was using an electric torque tool and an extension with a swivel socket attached, The employee was using their right hand to stabilize the swivel socket onto the bolt. When they began to tighten the bolt for the bracket, the employee's glove got caught and wrapped up in the extension resulting in amputation of their right index fingertip at the first knuckle.

An employee was lifting a pallet skid off a roller table when their little finger was crushed between the pallet skid and a stopper post, resulting in a fingertip amputation.

An employee was breaking down a metal bracket/mount after the completion of an engineering test. Bolts are used to raise or lower the mount depending on the test. The employee was lowering the mounting bracket. Once bolts were loosened, the weight of the bracket caused it to slide down and pinch his right index finger between a groove on the bracket and the bolt assembly, resulting in an amputation of the finger pad.

An employee was forming a part on a brake press. As they repositioned the part and pushed it to the back stop, the employee's left middle finger was pinched between the part and the brake tooling, resulting in a fingertip amputation.

An employee was patrolling a store using an electric patrol scooter when they lost their balance and sustained an ankle fracture.

An employee was operating a forklift to move panels around the dock area when the vehicle struck a joint where the two floors meet. The employee lurched forward and struck his head on the steering wheel. The employee then fell from the vehicle and sustained a dislocated disc in their back, requiring hospitalization.

An employee was standing inside a semi-trailer when the driver of the semi-trailer pulled away, causing the employee to fall backward and strike their head on a steel dock plate. The employee suffered a skull fracture, a fractured L1 vertebra, a broken coccyx, a laceration/abrasion to the head, and a brain bleed.

An employee was riding an ATV, catching up with a stray cow to return it to a pen. The ATV tire struck a hole or other obstacle, causing the employee to be ejected and fall to the ground. His leg was broken and he was hospitalized.

An employee was driving a van in reverse when they fell out of the vehicle and landed on the ground in the parking lot. The employee sustained a fractured left hip.

An employee was welding lift arms when their shirt caught fire due to welding sparks or heat, resulting in thermal burns to their upper chest.

An employee was climbing up a fixed ladder alongside a building to inspect a roof leak. The employee fell off the ladder and landed on the ground about 15 feet below. The employee was hospitalized with fractures to both wrists.

On September 16, 2025, an employee went to pull a weld stand when he tripped and fell, landing on the floor on his right hip. The employee suffered hip and fibula fractures that required hospitalization and surgery.

An employee was accessing a tensioned hook that required a hoist mechanism to be engaged. He was unhooking the lift hook from a shelf column when the "up" button was pressed, which released the tension on the pneumatic air hoist. The employee's right index finger was caught between the hook and the column, resulting in a soft tissue amputation and fracture to the fingertip.

A crane was lifting a pole out of a zinc bath in the galvanizing department when the chain attached to the pole broke. The pole fell back into the bath and liquid zinc splashed onto an employee, who suffered third-degree burns to an arm, the abdomen, the torso, the upper left side of the chest, an ear, the neck, and a hand.

An employee was stacking concrete blocks for a concrete bunker. As a block was swinging into place, the employee's left leg was pinched between two blocks, resulting in injuries to his left heel and lower leg.

An employee was climbing a ladder to inspect a vent in a restaurant dining area. The ladder slid out on the floor and the employee fell approximately 12 feet onto the ladder and the floor. He was hospitalized with a dislocated shoulder and a back injury.

An employee was rappelling down a tree. When he was most of the way down, he fell on the ground and suffered a broken pelvis.

An employee was filtering a fryer with a fryer filter machine. After going around the corner and then returning to the fryers, the employee stepped into the filter machine. The hot oil burned the employee's right ankle, and the employee was hospitalized.

An employee was cleaning out corn from a grain bin. The sweep auger in the bin was activated and caught his trouser leg. His leg was pulled into the auger, which injured his calf and caused leg fractures and lacerations.