Amparo Carpentry Inc.

An employee was on top of a 2-by-4 purlin installing rafters. The purlin broke and he fell to the ground about 16 feet below, suffering a broken left femur.

An employee was working in a boom lift to help tear down a building. The employee stepped out of the boom lift and onto one of the trusses when the building collapsed, causing the employee to fall approximately 17 feet to the ground below. The employee sustained fractures to the wrist, hand, ribs, and face.

An employee was climbing a power line pole when the pole broke at ground level while the employee was approximately 20 feet up. The employee rode the pole to the ground and sustained 12 broken ribs, a broken collarbone, and a punctured lung.

An employee was on a pallet that was being lifted by a forklift to a height of 20 feet. The pallet broke and the employee fell to the warehouse floor sustaining fractures to their nose, ribs, and ankle.

An employee was performing tuckpointing while on a swing-stage scaffold. The rope on the scaffold broke and the side of the scaffold fell 20 feet to the ground. The employee impacted the ground and sustained a broken ankle that required hospitalization and surgery.

The injured employee was assisting five other employees with bracing a wall panel that was being stood up. Another employee slipped on frost on the floor surface. The employees went to evacuate the area in anticipation of the wall panel falling over. The injured employee went to jump through a window opening within the wall panel and their lower half was crushed by the falling wall panel. The employee sustained a fractured pelvis.

An employee was on a 6-foot ladder, working to nail a 2-by-4 on a hotel carport ceiling. He lost his balance and his muddy boots slipped. He then fell and his foot lodged in the ladder. His foot was broken in two places and he was hospitalized.

An employee was installing a ceiling joist for a residential home when they fell from a framing structure and landed on the ground 8 feet below. The employee's right arm was fractured.

On September 16, 2025, a employee was moving a dolly with seven drywall sheets. The wheel of the dolly got stuck. The material tipped over and fell onto the employee's left foot, fracturing their tibia.

An employee was installing 80-foot-long trusses onto a 150-foot by 80-foot post-frame building. The employee worked from the north lift and then on the trusses about 20 feet up to install bracing. While installing diagonal bracing on the top chord, the trusses collapsed, causing the employee to fall approximately 20 feet to the concrete and be struck by the falling trusses. The employee was hospitalized with a fractured pelvis and a concussion.

An employee was helping a coworker transport a tall palm tree with a mini skid steer. The employee was severely shocked by a high-voltage electrical wire above the ground.

An employee was retrieving a Christmas tree from a shelf using a ladder. He missed a step and fell to the concrete floor. He sustained injury to his head and wrist.

An employee was inspecting a generator whose radiator was leaking. He slipped, and a fan blade in the generator amputated his thumb and index finger.

An employee was operating an agricultural tractor during sugarcane harvesting. The employee sustained a lumbar sprain due to vibration or motion from the tractor.

An employee was moving a 3-ton condensing unit, strapped down on a dolly, out of a garage. The strap broke, causing the employee to fall backward onto the brick pavered driveway. The employee suffered injury to a spinal ligament in the neck.