Struck by discharged object or substance · Fractures
At a glance
Federal OSHA recorded a severe workplace injury
at Cobey Inc., 1 Ship Canal Parkway, BUFFALO, NEW YORK 14218
on — Fractures, affecting the multiple body parts, n.e.c..
Final narrative
An employee was investigating the accumulation of condensation at a pipe connection and was inspecting the flange at the connection. The residual pressure in the system caused the pipe to release from the connection and strike the employee, fracturing his neck, back, collarbone, and multiple ribs and lacerating the back of his head.
HospitalizedMultiple body parts, n.e.c.Metal pipes, tubing
Employee 1 was cleaning a paint gun using paint thinner when employee 2 started a lighter nearby and the cup of paint thinner ignited. Employee 2 dropped the cup and the ignited paint thinner spilled, causing burns on employee 2's arms, legs, hands, and face.
An employee was installing wood trim surrounding a skylight inside a home. While holding a piece of trim in it's desired location, his pneumatic nail gun discharged, sending a 3/4-inch pin nail into his left forearm.
An employee removed a safety valve on a trailer that unknowingly contained nitrogen gas. The gas released from the trailer and pushed the employee backward off a scaffold approximately 10 feet before they struck a garage door, resulting in a pelvic injury.
An employee was sitting at her workstation when a nail gun malfunctioned and shot a nail into her left leg. She suffered a puncture and blood vessel injury and was hospitalized.
On November 25, 2023, an employee was using a high-pressured water hose to perform sewer line cleaning operations. The employee's right little finger and palm were lacerated by pressurized water from the hose.
An employee was spotting a crane when the load (fabricated skid for packaged equipment) that was being picked up came loose and fell on the employee. The employee sustained a crush injury resulting in a fractured pelvis.
An employee was setting up dies on a die casting machine. The machine's ram unexpectedly returned from the down position and caught the tip of the employee's right thumb against a pinch point in the shot sleeve. The employee suffered an open fracture/amputation to the thumb tip. The machine was not locked out at the time.
Employee 1 was cleaning a paint gun using paint thinner when employee 2 started a lighter nearby and the cup of paint thinner ignited. Employee 2 dropped the cup and the ignited paint thinner spilled, causing burns on employee 2's arms, legs, hands, and face.
An employee was servicing a reciprocating air compressor when their left middle finger was caught in a belt motor pulley sheave while manually moving the belt. Approximately 1/4 inch of the employee's left middle fingertip was amputated.
An employee was operating a battery-powered broom to clean demolition debris off the top of the outermost bridge girder. The girder was approximately 11 feet above the demolition scaffold below. The employee fell approximately 8 feet to wind bracing below. The employee was hospitalized with a pelvis/tailbone fracture. Fall protection was in place at the time.
An employee slipped while descending in a stairwell, fell, and suffered multiple contusions/bruises to the head, neck, shoulders, knees, and back. She was hospitalized.
An employee was directing trucks as they entered and left a highway work zone. A vehicle struck them, resulting in multiple fractures and other injuries. The employee was hospitalized.