Johns Manville

An employee was about to dump sand from a hopper, raised on the forks of a forklift. As the hopper's weight shifted forward and it began to dump, the employee's left middle finger was pinched between the forklift fork and the metal frame of the hopper. The fingertip was crushed, and the employee underwent a medical amputation at the first knuckle.

An employee was pushing a mineral cart into an oven when the oven door malfunctioned and closed on their right thumb. The employee sustained a partial amputation of the thumb tip.

An employee was preparing a glass melter for extensive repairs. Water was being introduced into the melter with a lance to break up the hot glass. The water caused the molten glass to exit the melter with force, contacting the employee. The employee sustained thermal burns to their forearm, neck, and head.

An employee was attempting to clear a clog in the sand reclaim auger bin when his left hand was pulled into the rotating screw of the machine, resulting in a partial amputation of the left middle finger at the first knuckle. The auger was not locked out/tagged out at the time.

An employee was dislodging a build-up of semi-molten glass that had accumulated on the outside of one of the rotating cooling rollers on a glass marble machine. While tapping the accumulated glass with a metal bar, the bar jerked downward and pinched the employee's right little finger between the metal bar and the frame of the machine. The employee sustained a partial amputation of the finger just below the nail.

An employee was changing a saw blade when the saw machine activated. The employee's left ring and little fingers were amputated.

An employee was clearing a jam from the label cutting machine when their left middle finger was partially amputated.

Two employees were repairing the hydraulic engagement pins on a rented front-end wheel loader. The machine controls were activated to move the attachment pins and an employee's finger was caught between the pins and the bushings. Their right index finger was partially amputated.

An employee was cleaning the conveyor on a piece of equipment when they slipped and their right hand was pulled into the chain sprocket. The employee's fifth fingertip was amputated.

An employee was throwing blankets onto a blanket folding and stacking machine. A blanket got stuck in the machine and she attempted to remove it when the machine contacted her right little finger, resulting in a fingertip amputation.

On July 17, 2025, an employee was informed that the overtravel cable came off the wire rope drum. He went to unwind the rope drum. The bucket moved and caused the rope to tighten on the employee's right thumb, resulting in a partial amputation.

AN employee was working on the automated feed line when the pusher jammed. The employee cleared the jam, which caused the pusher to activate the press. The employee's right middle, ring, and little fingers were caught between the press mechanism and the material, resulting in amputations to the fingers.

An employee was walking down a ramp from a parking lot toward a building. The employee slipped on snow and ice and fell, suffering a back injury.

An employee was installing a belt onto the sheave of a fan motor. The machine was being rotated by hand to put a new belt in place when the employee's fingers got caught between the machine and the belt, resulting in a partial amputation of the little fingertip.

An employee was preparing a glass melter for extensive repairs. Water was being introduced into the melter with a lance to break up the hot glass. The water caused the molten glass to exit the melter with force, contacting the employee. The employee sustained thermal burns to their forearm, neck, and head.

An employee was working to remove a product blockage from a piece of equipment. The employee was struck by a metal bar near the deck of the pin mixer equipment and sustained blunt force trauma to the torso.

An employee was moving a rack onto a lower conveyor in the south heat treat area when their finger got caught between the part tray and the rollers, resulting in a fingertip fracture and amputation.

An employee was climbing a ladder to get on top of the breakroom. The ladder slipped, causing him to fall to the ground. The employee sustained fractures to his upper back, left foot, and ankle.

Two employees were removing a circuit breaker. The injured employee was using wrenches in the removal process. One of the wrenches contacted an adjacent door, resulting in an arc flash. The employee suffered burns to their neck, face, and ear, as well as momentary vision loss due to the flash.

An employee bent over to pick up a rubber mat from the ground. When he grabbed the corner of the mat, a rattlesnake hidden under it bit his left middle finger near the first knuckle. He was hospitalized.