Caught in running equipment or machinery during regular operation · Amputations
At a glance
Federal OSHA recorded a severe workplace injury
at Spendrup Fan Company, 2768 C 1/2 Road, GRAND JUNCTION, COLORADO 81502
on — Amputations, affecting the finger(s), fingernail(s), unspecified.
Final narrative
An employee was attempting to grab an 18-inch piece of sample material coming through an angle roller when their fingers became caught in the machine. The employee sustained a cut to their right middle finger and a partial degloving and partial amputation to their left index finger.
An employee was using a lathe and sandpaper to sand a piece of metal pipe. As he was sanding the pipe, the sandpaper wrapped around the lathe and then wrapped itself around the second and third fingers of his right hand, partially amputating them.
An employee was sharpening peeler blades when their shirt was caught in the grinding wheel. The employee sustained tendon damage and a crushed right hand.
An employee was preparing to cut lumber on a panel saw when the clamp engaged and caught the employee's left middle finger, resulting in a fingertip amputation.
More severe injuries in this industry (NAICS 333413)
An employee was using a multimeter to ensure proper power supply to a newly repaired rotary screw air compressor before running a voltage test. An electrical arc flash occurred, resulting in burns to both the employee's hands and their face.
An employee was on the roof of a building, putting plastic around a dust collector, when their left middle finger was caught in a grinder insider the dust collector. The employee suffered a partial amputation to the left middle finger.
On August 4, 2025, an employee was fixing a jammed carousel and using a hook to manually adjust the carousel by hand. The hook slipped off and the employee fell to the concrete ground, resulting in hospitalization for a fractured right hip.
An employee was replacing a screen on a rooftop HVAC unit when the rotating exhaust fan blade contacted their right index finger, resulting in a laceration that required hospitalization and the surgical amputation at the first knuckle.
An employee was changing an air filter when the door to the HVAC closed due to wind. The employee sustained an amputation to the left thumb at the nailbed.
An employee was delivering materials. He was doing his pre-delivery inspection on the roof of the jobsite (a warehouse) when he fell through a plexiglass skylight. He landed on his feet on the concrete floor 14 feet below. The employee sustained fractures to his spine, left ulnar/radius, and right heel. The employee required surgery.
An employee was removing packaging from a roll of printing substrate. The blade of their utility knife got stuck. The employee used both hands to free the knife and the blade partially amputated their left little fingertip.
A concrete batch plant operator was assisting with clearing spoil piles using a skid steer. The skid steer backed into a stationary screen plant. The employee's left little finger was crushed between the controls of the skid steer and the screen plant, resulting in a fracture and laceration. The employee's finger was surgically amputated.
An employee was standing on an extension ladder, using a torquing tool to remove bolts that secured blades to a rotor. When the torquing tool activated, its reaction arm came around and pinched the employee's right middle finger against a lifting eye. His fingertip was amputated.