Compressed or pinched by shifting objects or equipment · Crushing injuries
At a glance
Federal OSHA recorded a severe workplace injury
at Otis Elevator Company, 14601 Heritage Parkway, FORT WORTH, TEXAS 76177
on — Crushing injuries, affecting the finger(s), fingernail(s), unspecified.
Final narrative
An employee was disconnecting a platform from a shipping crate. The employee's right thumb was crushed between the stabilization bracket on the crate and the platform. The employee was hospitalized for surgery.
Employees were installing components of an elevator from inside the elevator and removed temporary hoisting equipment when the elevator descended from the fourth floor to the pit floor. One employee was hospitalized with fractures to their fibula and a rib, and the other employee was hospitalized with fractures to both feet.
An elevator mechanic was lifting a wheelchair lift frame when the load shifted, catching him between the load and an ATM machine. The employee sustained a liver laceration.
An employee had just replaced the passenger-side rear panel of a stake truck and was latching the panels together. A freight truck pulled away from the loading dock and struck the vehicle the employee was working on, pushing the vehicle into the employee and pinning him between the vehicle and a roll-off dumpster. He suffered a hip fracture.
An employee was guiding a powered industrial vehicle into position to lower an elevator machine onto a pedestal for installation. The elevator machine shifted and pinched the employee's fingertip. The fingertip was amputated above the nailbed, without bone loss.
An employee had just finished installing the traveling cable on an elevator and was standing on the work deck when the hanger failed. As the traveling cable fell, it wrapped around the employee's legs and broke both of his ankles.
An employee was operating a forklift and unloading a truck. After the truck was unloaded, the employee got off the forklift and proceeded to adjust the dock plate with a hook tool. The dock plate slipped and the employee went to adjust the plate with their hand when their left middle finger got caught. Their finger was amputated above the first joint.
An employee was rotating a carbide granulator blade when his finger was caught between the blade and a stationary part of the machine. The employee's right middle finger was partially amputated and they suffered an avulsion to the right ring fingertip.
An employee was using a CNC metal lathe machine in manual mode to check that the thread blocking tool made contact with the jaws. As the employee was manually spinning the spindle, his index fingertip was crushed between the spindle's jaws and the grooving insert, resulting in a fingertip amputation.
During a material handling operation, an employee's fingertip was caught under an air conditioning unit as the unit was lowered onto a cart. The employee's fingertip was amputated.
An employee was removing a bolt from a tractor hub when their right index finger was caught between the hub and the frame. The employee's fingertip was crushed and the employee was hospitalized.
More severe injuries in this industry (NAICS 238290)
An employee was operating a gas tugger to lift metal sheeting. His left hand was pulled into the pulley, which crushed his left thumb, resulting in avulsions and other tissue damage. He was hospitalized and required surgery.
An employee was assisting with cutting a vertical steel pile. A 16-foot by 9-inch section of pile dropped to the side and bounced off a previously cut pile and toward the employee. The employee was struck in the torso and leg, causing his knee to dislocate from his femur. The employee was hospitalized.
On July 30, 2025, an employee was utilizing a circular saw to cut plastic into strips that would be used as shims. The blade of the saw amputated his left little finger to the second knuckle.
An employee was working on the ingot loader of a aluminum processing machine and noticed a pin was not installed. The employee reached to retrieve the pin and the machine activated for a functions test. The machine closed on the employee's hand, resulting in a hand injury requiring hospitalization.
After cutting a slab of beef short ribs, an employee turned to grab the pieces he had cut and his right hand contacted the saw blade. The employee sustained an amputation to his right index finger.
An employee was unloading a carpet pad from a truck when they fell from the truck dock to the concrete below, resulting in five fractured ribs and an injury to their left lung.
An employee was walking up a walkway to enter a building through the back entrance when she tripped over the lip of the cement ramp. The employee fell and sustained a fractured right hip.