Pedestrian struck by vehicle propelled by another vehicle in nonroadway area · Fractures
At a glance
Federal OSHA recorded a severe workplace injury
at Otis Elevator Company, 1289 N. Post Oak, HOUSTON, TEXAS 77055
on — Fractures, affecting the hip(s).
Final narrative
An employee had just replaced the passenger-side rear panel of a stake truck and was latching the panels together. A freight truck pulled away from the loading dock and struck the vehicle the employee was working on, pushing the vehicle into the employee and pinning him between the vehicle and a roll-off dumpster. He suffered a hip fracture.
HospitalizedHip(s)Truck-motorized freight hauling and utility, n.e.c
Employees were installing components of an elevator from inside the elevator and removed temporary hoisting equipment when the elevator descended from the fourth floor to the pit floor. One employee was hospitalized with fractures to their fibula and a rib, and the other employee was hospitalized with fractures to both feet.
An elevator mechanic was lifting a wheelchair lift frame when the load shifted, catching him between the load and an ATM machine. The employee sustained a liver laceration.
An employee was disconnecting a platform from a shipping crate. The employee's right thumb was crushed between the stabilization bracket on the crate and the platform. The employee was hospitalized for surgery.
An employee was guiding a powered industrial vehicle into position to lower an elevator machine onto a pedestal for installation. The elevator machine shifted and pinched the employee's fingertip. The fingertip was amputated above the nailbed, without bone loss.
An employee had just finished installing the traveling cable on an elevator and was standing on the work deck when the hanger failed. As the traveling cable fell, it wrapped around the employee's legs and broke both of his ankles.
An employee parked their cart near a wrapping machine. As the employee was getting out of their cart, a forklift struck the cart. The employee's leg was pinned between their cart and a parked cart, resulting in a leg injury that required hospitalization.
Employees were setting up to offload an aircraft. The injured employee was standing near a baggage tractor by the right wing of the plane. A belt-loader was being driven from the nose of the aircraft to the aft when it struck the parked baggage tractor. The injured employee was pinned between the belt-loader and the baggage tractor and sustained a dislocated left knee.
An employee was hand-picking orders while standing near an order picker forklift. A co-worker was operating a turret forklift nearby when it struck the order picker forklift, which rolled over the employee's left foot. The employee suffered an injury to their big toe that required hospitalization and surgery.
An employee was walking between the tines of a stationary forklift when a nearby forklift struck the stationary vehicle, causing the tines to strike the employee. The employee was hospitalized for a leg injury.
A car wash employee was preparing a vehicle for a wash when a second vehicle pulled behind it and accelerated, striking the vehicle in front. The employee's left leg was struck, resulting in left lower leg and ankle fractures.
More severe injuries in this industry (NAICS 423830)
An employee was sorting sucker rods. His right hand was caught in the area where the rod hits up against the frame and his index fingertip was amputated just below the nail.
An employee was using a powered miter saw to cut 2x4's. The saw blade hit something inside a board (possibly a hidden nail) and jumped, causing a laceration to the employee's left forearm. The employee was hospitalized with soft tissue and tendon injuries that required surgery.
A crane had been used to set a steel plate on a steel frame. An employee was trying to remove a clamp from the plate when the plate fell and crushed the tip of his left little finger. The employee sustained a fingertip amputation.
An employee was operating a scissor lift, raised to a height of about 15 feet, to inspect an overhead crane rail. The crane itself was being moved. Its hook swung into the scissor lift s arms, causing the lift to tip over onto its side, which in turn caused the lift and the employee to fall to the floor. The employee suffered injuries including broken ribs, spinal fractures, scapula fractures, and internal injuries.
A technician was operating a crane hoist to lift/remove a cylinder head from the main engine (port). The load was lifted at an angle, causing the cylinder head to get stuck on the cylinder head studs. When it became free from the studs, the cylinder head swung. It struck the technician and caught them against the cabinet door. This resulted in an amputation of their left index fingertip at the distal knuckle.
After cutting a slab of beef short ribs, an employee turned to grab the pieces he had cut and his right hand contacted the saw blade. The employee sustained an amputation to his right index finger.
An employee was unloading a carpet pad from a truck when they fell from the truck dock to the concrete below, resulting in five fractured ribs and an injury to their left lung.
An employee was walking up a walkway to enter a building through the back entrance when she tripped over the lip of the cement ramp. The employee fell and sustained a fractured right hip.