Ignition of vapors, gases, or liquids · Second degree heat (thermal) burns
At a glance
Federal OSHA recorded a severe workplace injury
at Tamarack Energy Partnership, 3555 Hwy 95 S, NEW MEADOWS, IDAHO 83654
on — Second degree heat (thermal) burns, affecting the nonclassifiable.
Final narrative
At about 5:30 p.m. on March 16, 2022, an employee was trying to light the fire in a boiler. He threw diesel into the boiler's fire box through a small door on the front of the boiler, but the air pressure in the boiler caused the diesel to come back and set his shirt on fire. He suffered first- and second-degree burns.
An employee was cleaning a cordless drill. As they applied brake fluid to the drill and pulled the trigger, the fluid ignited. The employee suffered burns to the face, hands, and arms.
An employee was spraying glue to the floor of an enclosed cargo trailer. The fumes made contact with the heater causing a flash fire. The employee suffered burns to their face and right hand.
An employee was replacing a valve in the gas line to the fryer. The shutoff valve malfunctioned resulting in a gas leak that then ignited. The employee sustained burns requiring hospitalization.
An employee was performing preventative maintenance on a deflation fan, belt, and pulley. While working on the fan, the rotor in the fan unexpectedly began to spin due to the activation of a damper within the baghouse. The spinning of the fan caused a belt pulley to begin spinning, which made contact with the employee's hand, resulting in an amputation to the right middle fingertip.
An employee was backing up a skid steer from a fuel tank after refueling and struck a parked excavator, resulting in an avulsion injury to their upper right leg.
An employee cleaned out an ash pit. He then opened a door to another part of the machine and began putting a metal rod in the machine. The rod became jammed and struck the right side of the employee's head and face. He fell to the ground and lost consciousness. The employee was hospitalized with fractures to the jaw and orbital bone, and multiple lacerations.
An employee was diagnosing the lack of flow of product to a powder bin. The employee removed the rotary star valve below the bin. While he was reinstalling the valve, his right middle finger was crushed between its shaft and its housing. The finger was partially amputated.
An employee was standing on a multi-purpose ladder installing head flashing over a window. Their feet were approximately 6 feet off the ground and three rungs from the top. The employee lost their grip on the drill they were using and the ladder tipped over. The employee fell from the ladder to the ground, resulting in a fractured left wrist, bruised chest, and lacerations to their face and lip.
An employee was inspecting the overhead area of a single-person lift and repositioning the lift through a double doorway. As they were transitioning through the doorway, they were caught between the doorframe and the vertical mast of the lift. The employee was hospitalized with injuries to the nose, left maxillary sinus, left orbital bone, and left jaw, with fractures at the maxillary sinus area.
An employee was loading a 4-inch wooden door into a pickup truck when he felt a pop in his right side behind his shoulder blade. He was hospitalized later that day and underwent surgery, having suffered a collapsed right lung.