Russ Davis Wholesale, Inc.

An employee slipped and fell on a slippery production floor. The employee landed on their right knee, suffering a broken kneecap that required surgery.

On November 26, 2020, an employee was loading a missed pallet of bananas onto a truck using a forklift. At that moment, the loaded truck began pulling away. The forklift was caught between the departing truck and the loading dock, then fell an estimated 3 feet to the ground. The forklift remained in the upright position and the employee remained seated. The employee was hospitalized with back pain.

Employees were assembling and testing a butterfly valve unit and actuator combo. When the unit was function tested with air, the valve gate closed on an employee's left thumb resulting in a fracture and laceration.

An employee was doing a daily inspection of the sifter screen on a mixer when the mixer line activated. The armature for the screen struck the employee's right wrist. Their wrist was cut and their hand was fractured.

An employee was being trained on a machine when a roller came down on their hand, resulting in a fracture and laceration.

An employee was doing a dry run during the setup of an ice cream machine. The machine indexed and the filler head amputated the employee's left middle finger above the last knuckle.

An employee was on a 3-foot ladder guiding cable onto a spool during installation on an overhead door. As the control box was jogged, the employee's hand was caught between the cable and spool, resulting in a wrist and hand fracture.

An employee was on the floor of an aisle wrapping a pallet when an electric pallet jack struck him, resulting in fractured ankles.

An employee was removing a rug entangled in the rear tire of a powered industrial truck (PIT). The PIT was raised and supported by a fork truck jack. The PIT shifted/fell and struck the employee's hand. The employee's index fingertip was amputated and the employee was hospitalized.

On May 14, 2025, at approximately 6:30 AM, a driver was making a delivery at a customer s site when their hand was crushed in a roll-up door. The employee's finger was fractured in three locations and required surgical amputation.

An employee was operating a tractor and utilizing a 2.5-foot kinetic rope and a 1-inch soft shackle to pull another tractor that was stuck in the mud. An additional 30-foot kinetic rope with a soft shackle was hooked up to provide distance from the soft soil. While pulling, the loop end of the terminal shackle on the stuck tractor frayed and released the rope, causing it to recoil back at the pulling tractor. The rope(s) struck the back of the pull tractor, broke the rear window, and struck the employee. The employee was pushed forward into the steering wheel and sustained severe lacerations to the head and a collapsed lung.

An employee was staging products in the back of their box truck to be unloaded. He slipped on a surface in the truck that was wet from rain, and fell out of the back of the truck onto the concrete ground. The employee was hospitalized with a fractured left humerus and required surgery.

An employee was delivering materials. He was doing his pre-delivery inspection on the roof of the jobsite (a warehouse) when he fell through a plexiglass skylight. He landed on his feet on the concrete floor 14 feet below. The employee sustained fractures to his spine, left ulnar/radius, and right heel. The employee required surgery.

An employee was cutting cabinet trim using a table saw when four fingers on his left hand were severed, resulting in hospitalization and amputation.

An employee was removing packaging from a roll of printing substrate. The blade of their utility knife got stuck. The employee used both hands to free the knife and the blade partially amputated their left little fingertip.

A concrete batch plant operator was assisting with clearing spoil piles using a skid steer. The skid steer backed into a stationary screen plant. The employee's left little finger was crushed between the controls of the skid steer and the screen plant, resulting in a fracture and laceration. The employee's finger was surgically amputated.

An employee was standing on an extension ladder, using a torquing tool to remove bolts that secured blades to a rotor. When the torquing tool activated, its reaction arm came around and pinched the employee's right middle finger against a lifting eye. His fingertip was amputated.