105,313Records 71,083Employers 85,290Hospitalizations 27,770Amputations 2015-01-01 2025-10-31
Safety Incidents OSHA Severe Injury Reports · 2015–2025

TMS International, LLC

Machinery or equipment incident on water vehicle · Fractures

Federal OSHA recorded a severe workplace injury at TMS International, LLC, 12400 Hwy 43 N, AXIS, ALABAMA 36505 on — Fractures, affecting the wrist(s).

An employee was working in a barge, setting up plates. As the plates were being adjusted, they hit the employee in the wrist and back, breaking the wrist and bruising the employee's ribs. The employee was hospitalized for surgery.

Hospitalized Wrist(s) Barge

TMS International, LLC

A crane operator was repositioning a material handler crane down a 6.5-degree slope. The crane started moving forward and struck the tail of a stopped truck. The cab of the crane crushed inward toward the operator, pinning him inside the cab. The crane operator's left femur was broken.

TMS International, LLC

An employee was exiting the cab of his truck when he lost his footing and fell to the ground. The employee sustained two fractures to the right foot/ankle.

TMS International, LLC

An employee was cutting a thick metal plate using a handheld torch when they began experiencing symptoms of heat exhaustion. The employee was hospitalized.

TMS International LLC

On March 25, 2022, an employee had just detached a string of empty rail cars away from some loaded cars. The string of detached cars was being taken ahead, and the employee began pulling the knuckle of a rail car into the open position. The string of detached cars then momentarily came back, and the employee was pinched between two cars. The employee suffered a broken right hip and was hospitalized.

TMS International, LLC

An employee was removing a fill plug from the differential on a heavy loader. Hot oil causing second degree burns to the employee's left hand and right arm.

View TMS International, LLC's full OSHA safety record →

JONES STEVEDORING COMPANY

Employees were unloading logs on a logging vessel. The injured employee was standing on the deck as a load came in. The sling popped off the load and the end of the choker struck the employee's lower left leg, resulting in a shin fracture.

Tecnavi Srl

An employee was exiting a confined space while carrying a pressure gun when the trigger activated. Water penetrated the employee's left arm, resulting in injury.

Logistec Gulf Coast LLC.

The employee was putting shackles on the grab of a vessel-operated crane. As the crane was lifting the grab, it started to swing toward the hopper. The employee reached to stop it when they were caught and lifted by the grab and pinned between it and the hopper. The employee sustained a pelvic fracture and lacerations to the arm and pelvis.

U.S. Army Corps of Engineers, Northwestern Division

An employee was launching a boat during rough sea conditions. The employee lost balance, causing their left index and middle fingertips to be caught in the eye of the bow line, resulting in amputation.

U.S. Dept. of Navy

Two employees were in a boat pulling a 45-pound anchor out of the water by the rope. The rope tightened and as the employees were attempting to create slack in the rope, the injured employee began to slip. His hand was caught between the rope and the inside of the platform boat, resulting in amputation of the right middle finger with bone loss.

Universal Stainless & Alloy Products Inc.

An employee used a crane to set down a bar. The bar measured 9 inches by 16 feet. The strap got stuck under the bar, and the employee asked another employee to jog the roll. The bar rolled and pinched the injured employee's left hand, resulting in a fingertip amputation.

Priefert Manufacturing

An employee was loading a steel forming machine with steel to be processed. He went to move a cooling hose out of the way and his left thumb was crushed by the forming roller, resulting in injuries that required surgical amputation.

CF&I Steel L.P.

An employee was advancing a rail to line up for welding with a secondary rail on the weld line when his right middle and ring fingers were caught between the rails. The employee sustained an amputation to the top knuckle of the middle finger and a fracture to the ring finger. The machine was guarded at the time.

United States Steel Corporation

An employee was working near molten metal and experienced heat illness symptoms including cramps. The employee was hospitalized.

Tampa Bay Steel, LLC

An employee was preparing bundles of 24-foot square metal tubing to be loaded onto a truck and cut the safety band for a bundle. While the employee was removing a piece of dunnage from a bundle, they bumped the bundle with their leg. The metal tubing then fell forward and struck the employee, causing a fractured left ankle.

Sysco Gulf Coast, LLC

An employee was traveling down the maintenance aisle of a warehouse on a single-pallet front rider jack. The jack malfunctioned, causing the brakes to apply; the employee fell forward onto the concrete warehouse floor. The employee suffered an injury to the left leg and was hospitalized, requiring surgery.

Norflex, Inc.

An employee was operating a metal roller machine to roll a small piece of metal. The employee's right index finger became caught between the metal and the machine, and the fingertip was amputated.

Ampler Pizza II LLC

An employee was shot in the leg with a pistol during an altercation with two people who had entered the store without permission.

Birdsong Corporation

An employee was directing a truck driver to a dump site when the truck's peanut trailer slipped off the kingpin. As the trailer fell, a ladder attached to it lacerated the employee's ear. The employee was hospitalized.

Pilgrims

An employee was unloading a forklift from a trailer to the ground. The employee was climbing down the ladder of the trailer when their foot slipped through one of the rungs, causing them to fall backward onto the forklift forks. The employee was hospitalized for fractured ribs.