105,313Records 71,083Employers 85,290Hospitalizations 27,770Amputations 2015-01-01 2025-10-31
Safety Incidents OSHA Severe Injury Reports · 2015–2025

TMS International, LLC

Nonroadway collision with other vehicle(s) moving and standing vehicle · Fractures

Federal OSHA recorded a severe workplace injury at TMS International, LLC, 2100 Jack Warner Parkway NE, TUSCALOOSA, ALABAMA 35404 on — Fractures , affecting the Thigh(s).

A crane operator was repositioning a material handler crane down a 6.5-degree slope. The crane started moving forward and struck the tail of a stopped truck. The cab of the crane crushed inward toward the operator, pinning him inside the cab. The crane operator's left femur was broken.

Hospitalized Thigh(s) Cranes other mobile cranes

TMS International, LLC

An employee was exiting the cab of his truck when he lost his footing and fell to the ground. The employee sustained two fractures to the right foot/ankle.

TMS International, LLC

An employee was cutting a thick metal plate using a handheld torch when they began experiencing symptoms of heat exhaustion. The employee was hospitalized.

TMS International, LLC

An employee was working in a barge, setting up plates. As the plates were being adjusted, they hit the employee in the wrist and back, breaking the wrist and bruising the employee's ribs. The employee was hospitalized for surgery.

TMS International LLC

On March 25, 2022, an employee had just detached a string of empty rail cars away from some loaded cars. The string of detached cars was being taken ahead, and the employee began pulling the knuckle of a rail car into the open position. The string of detached cars then momentarily came back, and the employee was pinched between two cars. The employee suffered a broken right hip and was hospitalized.

TMS International, LLC

An employee was removing a fill plug from the differential on a heavy loader. Hot oil causing second degree burns to the employee's left hand and right arm.

View TMS International, LLC's full OSHA safety record →

Crown Lift Trucks

An employee was operating a lift truck when it struck a stationary lift truck. His left thumb was pinched between the two lift trucks, resulting in a partial amputation.

McAneny Brothers, Inc.

An employee was pulling down a broken skid with a forklift. When the employee backed up the forklift to get the forks out of the skid he pulled down, he contacted the forks of another parked forklift, fracturing both of his legs. He was hospitalized.

THE ELITE FLOWER

An employee was operating an electric pallet jack when it struck two parked forklifts. The impact caused the employee to be ejected from the pallet jack, and his right foot became trapped between the forklifts, resulting in a severe laceration to the foot.

Waste Management of Mississippi, Inc

An employee was operating the compaction levers on a truck when a motor vehicle crashed into the back of the stopped truck. The employee sustained fractured ribs and contusions.

BGDC DISTRIBUTION LLC

On October 16, 2025, an employee operating an order selector was passing a moving scrubber when the scrubber suddenly stopped. The order selector struck the back of the scrubber, resulting in a cut to the employee's left ankle.

Effort Foundry, Inc.

An employee was unloading metal from two drums on a pallet. The employee removed the lid from the second drum and the drum fell over onto his ankle. The employee sustained a fractured ankle.

Effort Foundry, Inc.

An employee was working with team members on the pouring line, casting a sand mold. Molten metal entered the employee's personal protection suit and severely burned his left leg, calf, and ankle.

Northern Stainless Corporation

An employee was jointing a board with a jointer. The board jumped when it came into contact with the jointer's cutter head, and the jolt caused the employee's left hand to slide between the board and the guard and come into contact with the cutter head. He suffered lacerations/partial amputations to the middle, ring, and index fingers.

MetalTek International, Inc.

An employee was turning off a gas valve when he bumped into a die brush and struck the spinning die. The die pin struck him on the back, resulting in contusions, abrasions, and a severe laceration to his back that required hospitalization and surgery.

Staley Steel LLC

At 11:45 a.m. on June 13, 2025, an employee of Staley Steel, LLC, was performing preventive maintenance on an overhead crane. While he was holding a grease gun hose and nozzle, he contacted electrical components inside an electrical box. He suffered a first-degree electrical burn on the palm of the left hand, as well as pain up his left arm to the shoulder, and was hospitalized.

Sysco Gulf Coast, LLC

An employee was traveling down the maintenance aisle of a warehouse on a single-pallet front rider jack. The jack malfunctioned, causing the brakes to apply; the employee fell forward onto the concrete warehouse floor. The employee suffered an injury to the left leg and was hospitalized, requiring surgery.

Norflex, Inc.

An employee was operating a metal roller machine to roll a small piece of metal. The employee's right index finger became caught between the metal and the machine, and the fingertip was amputated.

Ampler Pizza II LLC

An employee was shot in the leg with a pistol during an altercation with two people who had entered the store without permission.

Birdsong Corporation

An employee was directing a truck driver to a dump site when the truck's peanut trailer slipped off the kingpin. As the trailer fell, a ladder attached to it lacerated the employee's ear. The employee was hospitalized.

Pilgrims

An employee was unloading a forklift from a trailer to the ground. The employee was climbing down the ladder of the trailer when their foot slipped through one of the rungs, causing them to fall backward onto the forklift forks. The employee was hospitalized for fractured ribs.